Quick-Ship Kilns

That the kiln is held in stock rather than built to order, so it can leave without waiting on a production slot. On this page it also means a furniture kit is bundled with it.

It does not change the freight time, which depends on where you are and how the carrier routes it. Shipping is calculated at checkout before you buy.

Shelves and posts sized to that specific chamber. That is the part people underestimate, because shelf sizes and post heights are particular to the kiln and ordering them separately means measuring carefully.

You will still want kiln wash for the shelves and witness cones for the firings. Ask us and we will add them to the order.

Because holding stock is expensive and only worth doing on the sizes that actually move. These four cover the most common cases: a small test kiln, a larger 120V model, and two full studio sizes.

If the size you want is not here it is not a problem, it just means it is built rather than held. Call us and we will tell you the realistic lead time before you order.

One of them, yes. The Doll E Quick-Ship uses an ordinary NEMA 5-15 plug and wants a 20 amp breaker.

The 1214-120HE does not. It draws 24 amps, needs a 30 amp breaker and uses a NEMA L5-30 twist-lock cordset. It is 120 volts, but it is not a household socket, and that is worth settling before you order rather than after.

A dedicated one. The MAS1823HE and MAS2327HE are both 240V cone 10 kilns, and the corresponding Olympic models draw 26.25 and 47 amps respectively, wanting 40 and 60 amp breakers.

Kilns are a continuous load, so the breaker is always sized above the draw. Confirm your panel has the capacity before you order. See the 240V range sorted by breaker.

They are the same Olympic models, held in stock and bundled with furniture. What you are buying is availability and a matched furniture kit, not a different machine.

That also means the same warranty applies, and we are an authorized Olympic dealer, so registering it is straightforward.

Kiln wash for the shelves, witness cones, and a plan for ventilation. The furniture kit covers shelves and posts, which is the expensive and fiddly part, but not the consumables.

You will also need the circuit ready before delivery if the kiln needs one. There is no point having the kiln arrive quickly and then waiting three weeks for an electrician.

Firing clay and glazes releases fumes, so the firing area needs ventilation whatever the kiln size. A downdraft vent system also pulls fresh air through the chamber, which helps burn off organics during bisque.

What your setup needs depends on the kiln, your materials, the room and any local codes. Call (470) 264-3563 and describe the space.

The small ones often go by parcel carrier. The studio sizes move by freight, with curbside delivery, appointment scheduling, tracking and liftgate service where required.

Curbside means the curb, so plan how the kiln gets from there into position before it arrives. Shipping is calculated at checkout. See our shipping page.

Performing the manufacturer's recommended initial test firing will not by itself void a return, as long as the other conditions in our policy are met.

Read the full terms, including timeframes and condition requirements, on our returns page.