SDS Industries TAP/TAP II Touchscreen Controller Board
$650.00
- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
SDS Industries TAP/TAP II...
$650.00
Overview
Jen-Ken · Controllers · Replacement boards SDS Industries TAP/TAP II Touchscreen Controller Board A replacement board for the SDS Industries TAP and TAP II touchscreen controllers. This is a repair part, not a controller: the board that goes inside an existing controller panel, with no housing, no enclosure and nothing to plug a kiln into. If your TAP or TAP II has failed and the panel around it is sound, this is the piece that brings it back. If you are adding programmed control to a manual kiln for the first time, you want the complete TAP II remote controller instead.
Part typeReplacement board
Supplied asBoard only
ForSDS TAP / TAP II
FitmentConfirm with us
What’s included
TAP II kiln controller
The control board itself.
Faceplate
The faceplate for the kiln brand you select.
Wiring harness pigtail
Supplied with the board.
Type K thermocouple — not included
SDS states the thermocouple is not included with the board. Order one with it if you are not reusing the existing thermocouple.
Technical specifications
PartSDS Industries TAP / TAP II touchscreen controller board
Supplied asBoard component only — no housing or enclosure
Controller typeFits the SDS Industries TAP and TAP II touchscreen controllers
Kiln fitmentNot published by Jen-Ken — we confirm it against your model and serial before shipping
Jen-Ken's description“SDS Industries TAP/TAP II touchscreen controller board for Jen-Ken kilns”
Supplied byJen-Ken Kilns
Optional accessories
SDS TAP II remote controllerThe complete external touchscreen controller, housing and all, if what you need is a controller rather than a board.
Orton AutoFire® boardsWe also list replacement boards for the 3-button, 12-button and Slide AutoFire® controllers.
Common questions
Will this board fit my kiln?We cannot tell you from the listing, and we will not guess. Jen-Ken sells this board for their own kilns but publishes no fitment list — no kiln model, no voltage, no amperage, and no serial or build-date cut-off. We will not guess at it. Send us your kiln's model and serial number and we will check this board against your kiln before we ship it.
Is this a complete controller?No. This is the controller board component only — not a complete controller. It has no housing and no enclosure. If you need the whole unit, see our external controller listings instead. The complete unit is the SDS Industries TAP II Remote Controller.
Is it in stock?Jen-Ken currently lists this board as sold out. Ask us for availability before you order — we would rather tell you up front than take an order we cannot fill.
Does a WiFi dongle come with it?Jen-Ken's product URL mentions a WiFi dongle but the listing itself does not, and Jen-Ken lists this as the controller board component only. We are not going to promise a dongle Jen-Ken has not confirmed — ask us and we will check with them before you order.
Will it work with the TAP app?The TAP Kiln Control app works with TAP and TAP II controllers, but a bare board is not a working controller and Jen-Ken does not state what is required to get a repaired unit back on the app. Ask us and we will confirm with SDS Industries.
Can I fit it myself?Only if you are genuinely comfortable working inside a kiln control panel. This is a 240V circuit and the wrong board on the wrong kiln is a real hazard. If there is any doubt, have an electrician or a kiln technician do it — and let us confirm the part first.
Send us your model and serial number first Jen-Ken publishes no fitment data for these boards, so we check every one by hand against your kiln before it ships. Tell us the model and serial off your kiln's plate and we will confirm the right board — no guesswork on a live 240V circuit.
Talk to an expert →