Orton AutoFire® Slide Remote Controller
$825.00
- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Orton AutoFire® Slide Rem...
$825.00
Overview
Jen-Ken · Controllers · Orton AutoFire Orton AutoFire® Slide Remote Controller The touchscreen end of the Orton AutoFire range. An external controller that turns a manual kiln into a programmed one — the kiln plugs into the controller, the controller plugs into the wall, and from then on the controller runs the firing. The Slide carries the same advanced capability as the AutoFire® 4000 behind a touchscreen instead of a button pad: a variable PID controller with extensive programming, single- or multi-zone operation, and Type K, N, S and R thermocouple inputs for operation up to 3308°F.
InterfaceTouchscreen
ControlVariable PID
ZonesSingle or multi-zone
Max temp3308°F (thermocouple dependent)
What’s included
Orton AutoFire Slide controller
The touchscreen unit, complete and ready to run a kiln.
Wall brackets
Included — the Slide can be mounted on the wall rather than left on the bench.
Thermocouples
Supplied with 8 ft wire extensions. Single- or multi-zone depending on the configuration ordered.
Cord set
Built to the NEMA plug you specify — 5-15, 5-20, 6-15, 6-20, 6-30, 6-50, 10-30, 10-50, 14-30, 14-50, or direct wire.
Manual and wiring diagrams
Orton's printed instructions, including the wiring diagrams for connecting to a manual kiln.
2-year warranty
Orton's limited warranty. It covers the motherboard and display, and is not transferable.
Technical specifications
ControllerOrton AutoFire® Slide, touchscreen interface
Control typeVariable PID temperature controller
ZonesSingle-zone or multi-zone operation
Thermocouple inputsType K, N, S and R
Maximum temperatureUp to 3308°F, depending on thermocouple type
MountingExternal — sits between the kiln and the wall outlet
Compatible withManual kilns requiring hand adjustment
Not compatible withKilns fitted with auto turn-up devices
ConfigurationJen-Ken describes 240V/30A and 240V/50A builds; confirm yours with us before ordering
Supplied byJen-Ken Kilns
Optional accessories
AutoFire® Slide controller boardIf your Slide controller itself has failed, the bare replacement board is listed separately.
Other AutoFire® controllersOrton also makes 3-button and 12-button AutoFire controllers — same programmed control, simpler interface, lower price.
SDS TAP IIIf phone monitoring matters more to you than the Orton feature set, the SDS TAP II pairs with the TAP mobile app.
Common questions
Will this work with my kiln?Two rules from Jen-Ken. It works only with manual kilns that you adjust by hand — it is not compatible with kilns already fitted with an auto turn-up device. And the controller has to be rated above your kiln's amperage draw. Tell us your kiln's make, model and amperage and we will confirm it before you buy.
Which voltage and amperage will I get?Jen-Ken's copy describes this controller in 240V/30A and 240V/50A builds, but does not offer them here as separate choices you can pick at checkout. Because the amperage rule above is the thing people get wrong, get in touch and we will confirm the exact configuration against your kiln rather than let you guess.
How is this different from the 12-button AutoFire?Capability is close — the Slide is described as offering the advanced features of the AutoFire® 4000 with a touchscreen in place of the 12-button pad. If you program complex multi-segment schedules often, the touchscreen is easier to live with. If you fire the same few programs, the button version does the same job for less.
What does multi-zone actually get me?In a tall kiln the top and bottom drift apart. A multi-zone setup reads and drives sections independently so the whole load sees closer to the same curve. On a small kiln it matters much less. Ask us whether your kiln is wired for it.
Who handles the warranty?Orton does — two years, direct from the manufacturer. Jen-Ken does not warrant controllers. We will help you open the claim.
Check the amperage before you order The single most common mistake with an external controller is fitting one rated below the kiln. Tell us your kiln's make, model and amp draw and we will confirm the right controller — it takes a minute and saves a return.
Talk to an expert →