Jen-Ken ProFusion 52 Deep Glass Kiln
$9,829.00Regular price$11,199.00
Save $1,370.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

Jen-Ken ProFusion 52 Deep...
$9,829.00
Overview
Jen-Ken · Glass Kiln · ProFusion Fiber Series
Jen-Ken ProFusion 52 Deep Glass Kiln
The ProFusion 52 Deep is the largest fiber kiln Jen-Ken builds and it is an architectural-scale tool: 52 inches by 26 inches of shelf, with 14 inches of clear height under the quartz element tubes, in an all-fiber chamber that heats and cools far faster than brick of the same volume. That combination is aimed at studios doing large panels, counter tops and sink bowls where a brick kiln of the same size would spend most of a week on each firing. It weighs 450 lbs, stands about four feet by five on the floor, and the controller mounts on the wall rather than the kiln body.
Max Temp1,700°F
Chamber52" x 26" x 15"
Capacity11.74 cu ft
Power240V · 45A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
The controller you orderJen-Ken fits the controller you pick when the order goes in — the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
Cord and plug — NEMA 6-50PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Crate contents — ask usJen-Ken does not publish a crate list for this model. We will confirm exactly what ships with it before you order rather than guess.
1-year limited warrantyJen-Ken's fiber-kiln warranty, direct from the factory to the original purchaser.
Not included — kiln furnitureNo shelves, posts or kiln wash in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
Key features
Quartz-encased elementsThe elements run inside quartz tubes rather than being buried in the fiber, so the chamber can be all-fiber and still fire directly on the work.
Built to order in FloridaAssembled in Jen-Ken's own Lakeland shop rather than drop-shipped from a distributor.
Chamber size52" x 26" x 15" nominal (14" clear height from the floor to the bottom of the quartz element tubes) — 11.74 cu ft. That is the space you actually have to load.
Maximum temperatureRated to 1,700°F (927°C).
Technical specifications
ModelProFusion 52 Deep
Kiln functionFiber fusing, slumping
Chamber dimensions52" x 26" x 15" nominal (14" clear height from the floor to the bottom of the quartz element tubes)
Cubic feet11.74 cu ft
Maximum temperature1,700°F (927°C)
Voltage240V
Amperage45A
Wattage10,800W
PhaseSingle phase
ReceptacleNEMA 6-50R
Breaker (fuse) sizeContact us — see note below
Circuit wire gauge#6
Element typeQuartz-encased elements
Element placementTop-fired
ControllerOrton AutoFire 4000 12-button, wall-mountable
Overall dimensions48" W x 61" D x 51" H
Kiln weight450 lbs
Estimated shipping weight650 lbs
Shipping dimensions54" x 68" x 66"
Shipping methodMotor freight
Warranty1-year limited (Jen-Ken fiber kiln)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf and fibre paper; casting wants posts and headroom. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln. Tell us your shelf size and we will match it.
Kiln wash and shelf primerGlass will weld itself to an unprimed shelf. Most glass workers go through primer steadily, so it is worth adding to a first order.
Slumping moulds and fibre paperMoulds and fibre paper are the other half of a warm-glass setup. Tell us the shelf size you are working to and we will point you at what fits.
Controller upgradeJen-Ken fits the Orton AutoFire 4000 12-button as standard and offers the Orton AutoFire Slide touchscreen and the SDS TAP II in its place. It is a factory option rather than a checkout add-on — call us and we will quote it.
Common questions
Why is there no breaker size in the spec table?Because Jen-Ken's two sources give different answers and one of them does not work. Their product page lists a 60-amp breaker behind a NEMA 6-50R receptacle — a 6-50R is a 50-amp device, so it cannot sit on a 60-amp circuit. The wiring table in Jen-Ken's own owner's manual gives the ProFusion line a 50-amp fuse on the same receptacle, which is coherent but contradicts the page. The breaker size is one of the two numbers you hand your electrician, so we will not print a figure we cannot stand behind. Call or email us before anything is wired and we will get the nameplate figure from the factory for your build.
What is safe to rely on, then?240V single phase, a 45-amp draw and 10,800 watts are consistent everywhere and are forced by the arithmetic — 10,800W at 240V is 45A. The NEMA 6-50R receptacle is given by both Jen-Ken sources, and #6 copper is given by both as well. Those are published above. Size the circuit to the 45-amp draw with a licensed electrician and confirm the breaker with us first.
What cone will it reach?Jen-Ken publishes no cone rating for any kiln in their glass line, and we have not invented one. What is published is the maximum temperature, which is in the table above. Cone numbers are a ceramics measure; for glass work the temperature and the firing schedule are what matter.
What will actually fit in it?A 52" x 26" shelf with about 14 inches of clear height under the elements. That is large-panel and counter-top territory, and deep enough for substantial slumping moulds. If your work is smaller than about 38 inches, the ProFusion 38 does the same job for a good deal less money and a good deal less floor space.
Is there anything to know about the room?Yes. It crates at 54" x 68" x 66" and 650 lbs, so doorways, corners and floor loading all matter, and it is a motor-freight delivery with a lift gate. Talk to us about access before you order — this is the model where getting it into the building is the hard part, not running the circuit.
What actually comes in the crate?Jen-Ken does not publish a crate contents list for this model, which is why the section at the top of this page says so rather than itemising it. Kiln furniture is the thing most people assume is in the crate and is not — Jen-Ken prices the shelves and posts as a separate kit. Call or email us if you want the crate confirmed against your build before you order.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory warranty applies exactly as it would buying direct. Note that Jen-Ken warrants fiber kilns for one year and brick kilns for two — the ProFusion is a fiber kiln, so it is the one-year line. Keep your proof of purchase.
Talk to us before you book the electrician.
We are authorized Jen-Ken dealers based in Georgia. Jen-Ken's page and Jen-Ken's own manual disagree on this kiln's breaker size, and one of the two figures is not a circuit that can be built. Call us and we will get the nameplate figures from the factory for your install.
Talk to an expert →
