Jen-Ken Oval 18 Glass/Casting Kiln
$5,109.00Regular price$5,660.00
Save $551.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

Jen-Ken Oval 18 Glass/Cas...
$5,109.00
Overview
Jen-Ken · Glass Kiln · Oval Glass/Casting
Jen-Ken Oval 18 Glass/Casting Kiln
The Oval 18 is the biggest Glass/Casting kiln Jen-Ken builds in brick: a 39-inch by 24-inch oval chamber with eighteen inches of height, coils in both the top and the sides, and a 2,150°F casting ceiling. The oval shape is not decoration — it is what lets a 39-inch panel or a long platter sit on one shelf without a kiln the size of a car. Eighteen inches of height is enough for substantial casting moulds standing up. It draws 45 amps at 240V and weighs 350 lbs, so this is a sited installation with a freight delivery, not something you shuffle about.
FiresGlass, casting, low-fire clay
Max Temp1,700°F / 2,150°F
Chamber39" x 24" x 18"
Power240V · 45A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
The controller you orderJen-Ken fits the controller you pick when the order goes in — the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
Cord and plug — NEMA 6-50PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Lid lifterJen-Ken's dealer sheet lists this model as including the lid lifter — the spring assist that takes most of the weight out of raising the lid.
2-year limited warrantyJen-Ken's brick-kiln warranty, direct from the factory to the original purchaser.
Not included — kiln furnitureNo shelves, posts or kiln wash in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
Key features
39" x 24" oval chamberLong enough for panels and platters that will not sit on a square shelf, without the floor space a square kiln of the same length would need.
Top and side coilsCoils in both planes, which is what gives an oval this size an even fuse rather than hot ends.
18 inches of heightRoom for a substantial casting mould standing up, not just flat work.
Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
Technical specifications
ModelOval 18 Glass/Casting
Kiln functionGlass casting, fusing, slumping, low-fire ceramics
Chamber dimensions39" x 24" x 18"
Cubic feet9.33 cu ft — see the note below
Maximum temperature — glass1,700°F (927°C)
Maximum temperature — casting2,150°F (1,177°C)
Voltage240V
Amperage45A
Wattage10,800W
PhaseSingle phase
ReceptacleNEMA 6-50R
Breaker (fuse) sizeContact us — see note below
Circuit wire gauge#6
Element placementTop and side coils
ControllerOrton AutoFire 12-button
Kiln weight350 lbs
Estimated shipping weight450 lbs
Shipping methodMotor freight
Warranty2-year limited (Jen-Ken)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf and fibre paper; casting wants posts and headroom. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln. Tell us your shelf size and we will match it.
Kiln wash and shelf primerGlass will weld itself to an unprimed shelf. Most glass workers go through primer steadily, so it is worth adding to a first order.
Slumping moulds and fibre paperMoulds and fibre paper are the other half of a warm-glass setup. Tell us the shelf size you are working to and we will point you at what fits.
Controller upgradeJen-Ken fits the Orton AutoFire 12-button as standard and offers the AutoFire Slide touchscreen and the SDS TAP II in its place. It is a factory option rather than a checkout add-on — call us and we will quote it.
Common questions
What does "Glass/Casting" actually mean?Two firing modes in one kiln. For fusing and slumping the elements fire from the top and the sides together, which washes a wide shelf in even heat — that is what flat glass wants, and the ceiling there is 1,700°F. For casting, the side elements do the work on their own and the kiln will go to 2,150°F, which is the range a casting mould and a long ramp need. You select the mode; it is one kiln with two ways of heating, not a compromise between them.
Why is there no breaker size in the spec table?Because Jen-Ken's two sources disagree and one of the figures cannot be built. Their product page lists a 60-amp breaker behind a NEMA 6-50R receptacle — a 6-50R is a 50-amp device and must not sit on a 60-amp circuit. The wiring table in Jen-Ken's own owner's manual lists the Oval 18 at 240V, 45 amps, #6 wire, a 50-amp fuse and a 6-50R, which is coherent but contradicts the page. The breaker size is one of the two figures you hand your electrician, so we will not print one we cannot stand behind. Call or email us before anything is wired and we will get the nameplate figure from the factory. Everything else — 240V, 45 amps, 10,800 watts, the 6-50R and #6 copper — appears in both sources and is published above.
What cone will it reach?Jen-Ken publishes no cone rating for any kiln in their glass line, this one included, and we have not worked one out from the temperature. What is published is the two ceilings — 1,700°F in glass mode and 2,150°F in casting mode — and those are in the table above. Treat 2,150°F as low-fire clay and glaze territory.
Will it fire clay?Low-fire clay and glaze, yes — Jen-Ken lists low-fire ceramics among this kiln's functions and 2,150°F is in that range. What it will not do is mid-fire or high-fire stoneware: cone 6 is out of reach, let alone cone 10. If pottery is the main event, buy a ceramic kiln and keep this one for glass. If you fire glass most of the time and want the option of a low-fire load, this is exactly the kiln for it.
Why do you list 9.33 cubic feet when Jen-Ken says 14?Because 14 is the Oval 27's figure and it has been copied onto this page by mistake. A 39" x 24" x 18" box is 9.75 cubic feet before you take anything off for the oval shape, so 14 is not merely generous — it is larger than the chamber could be if it were square. Jen-Ken's own Ceram-a-Glass Oval, which has exactly the same 39" x 24" x 18" chamber and the same 450 lb shipping weight, is published at 9.33 cubic feet, and their Oval 13 and Oval 27 figures form a consistent series with it: 7.2, 9.33, 14. We have published 9.33 because it is Jen-Ken's own number for this chamber. The 14 would have you over-buy shelves and mis-plan your floor by half. We have raised it with the factory.
How much floor does it need?It crates at 450 lbs and arrives by motor freight with a lift gate, and the chamber alone is over three feet long. Talk to us about access, doorways and where it lands before you order — on a kiln this size, getting it into the room is usually the harder half of the job.
What actually comes in the crate?The section at the top of this page is that list, and it comes from Jen-Ken’s own dealer price sheet for this model rather than from a guess. Kiln furniture is the thing most people assume is in the crate and is not — Jen-Ken prices the shelves and posts as a separate kit. Call or email us if you want the crate confirmed against your build before you order.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory warranty applies exactly as it would buying direct. Jen-Ken gives brick kilns two years. Keep your proof of purchase.
Talk to us before you book the electrician.
We are authorized Jen-Ken dealers based in Georgia. Jen-Ken's page and Jen-Ken's own manual disagree on this kiln's breaker, and their published cubic-feet figure belongs to a different model. Call us and we will get the real numbers from the factory before anything is installed.
Talk to an expert →
