Black Friday Kiln Sale ends in
09Days: 02Hrs: 01Min: 43Sec
$125 off $1,500+ $250 off $3,000+ $500 off $5,000+
Save up to $500No code needed · applied at checkout
Shop kilns

Jen-Ken Ceram-a-Glass Oval 3" Kiln

Jen-KenElectric KilnSKU JENKEN-CAG-OVAL-3
$6,279.00Regular price$7,076.00
Save $797.00

  • 15-day returns
  • No sales tax outside Georgia
  • Made in USA
Configure your kiln Not sure? Call 470-264-3563
Furniture kit

Oval Ceram-a-Glass is the size our records hold for this kiln. Change it here if your chamber is a different size, or call us and we will check it with you.

  • Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

    Shipping is chosen at checkout: free curbside freight, or Freight + Liftgate Delivery for $139.

    Freight is free and curbside, without a liftgate: plan on a loading dock, a forklift or 2 or more helpers. Or choose Freight + Liftgate Delivery at checkout, $139.

    Jen-Ken Ceram-a-Glass Ova...
    $6,279.00
    Call

    Overview

    Jen-Ken · Ceram-a-Glass · Dual-Media Kiln Jen-Ken Ceram-a-Glass Oval 3" Kiln Model CAG Oval 3" · 240V · 39" x 24" x 18" chamber · 1,700°F glass / 2,150°F ceramic The oval exists for work that is long rather than round — a 39" x 24" footprint that takes two 21" x 18" D-shaped shelves and gives you a 21" x 36" firing surface. Like the rest of the Ceram-a-Glass line it has two element sets and a switch: lid coils firing down for glass fusing and slumping to 1,700°F, side coils firing in for ceramics and casting to 2,150°F. 3-inch brick, 9.33 cubic feet, lid lifters included, and a choice of two electrical builds depending on what your shop can feed it.
    FiresGlass + ceramics
    Max Temp1,700°F / 2,150°F
    Chamber39" x 24" x 18"
    Power240V · 45A or 55A
    What’s included
    The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
    The controller you orderJen-Ken fits the controller you pick when the order goes in — the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model. Jen-Ken’s own page names the Orton AF3C 3-button as this model’s standard board, but their dealer price sheet prices only the controllers above for it, so ask us and we will confirm with the factory before your order goes in.
    Cord and plug, or direct wireThe 45-amp build ships with a cord and a NEMA 6-50P plug. The 55-amp build is direct-wired instead, with no plug, so an electrician lands the cable for you. Tell us which build you want before the order goes in.
    Kiln standJen-Ken lists the stand with this model. It lifts the kiln off the floor for airflow and brings the chamber to a workable loading height.
    Kiln washShelf primer, included by Jen-Ken with this model. Glass in particular will weld itself to an unprimed shelf.
    Lid liftersJen-Ken lists lid lifters with this model, so the lid counterbalances instead of being hauled by hand.
    2-year limited warrantyTwo years, direct from the Jen-Ken factory to the original purchaser and honoured through us as the dealer. Keep your proof of purchase.
    Not included — kiln furnitureNo shelves or posts in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
    Key features
    Glass / ceramic switchTwo element circuits and a toggle that chooses between them — lid coils for glass, side coils for ceramics. This is the whole point of the Ceram-a-Glass line.
    Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
    Chamber size39" x 24" x 18" — 9.33 cu ft. That is the space you actually have to load.
    Maximum temperature1,700°F (927°C) in glass mode, 2,150°F (1,177°C) in ceramic mode.
    Technical specifications
    ModelCAG Oval 3"
    Kiln functionGlass fusing, slumping and tall slumping; low-fire ceramics, clay, casting and glazing
    Chamber dimensions39" x 24" x 18"
    Cubic feet9.33 cu ft
    Brick3" firebrick
    Maximum temperature — glass mode1,700°F (927°C)
    Maximum temperature — ceramic mode2,150°F (1,177°C)
    Firing modesGlass / ceramic switch — lid coils for glass, side coils for ceramics
    Shelf it takesTwo 21" x 18" D-shaped shelves, making a 21" x 36" oval layer
    Voltage240V
    Amperage45A (45-amp build) or 55A (55-amp build)
    Wattage10,800W (45-amp build) / 13,200W (55-amp build)
    PhaseSingle phase
    ReceptacleNEMA 6-50R (45-amp build) / direct wire (55-amp build)
    Breaker (fuse) size60A (both builds)
    Circuit wire gauge#6 copper (55-amp build; Jen-Ken publishes none for the 45-amp build)
    Element placementTop and side — lid coils in glass mode, side coils in ceramic mode
    LoadingTop-loading, with lid lifters
    ControllerOrton AF3C 3-button (standard)
    Kiln weight375 lbs
    Estimated shipping weight450 lbs
    Shipping methodMotor freight
    Warranty2-year limited (Jen-Ken)
    Warranty: Two-year limited warranty from Jen-Ken Kilns to the original purchaser on brick kilns, covering defects in materials and workmanship and limited to repair or replacement of defective items. Elements and thermocouples carry their own two-year coverage; thermocouples are not warranted against breakage. The Orton controller is covered by Orton's own warranty. Keep your proof of purchase. Peach State Pottery is an authorized Jen-Ken dealer.
    Optional accessories
    Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf; ceramics want posts and stacking space. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln.
    Controller upgradeJen-Ken offers the AutoFire Slide and the TAP II touchscreen in place of the standard controller. It is a factory option, not a checkout add-on — call us and we will quote it.
    Kiln wash and shelf primerBeyond the starter kiln wash Jen-Ken includes, most glass workers go through primer steadily. Worth adding to a first order.
    Fusing and slumping mouldsSlumping moulds and fibre paper are the other half of a glass setup. Tell us the shelf size you are working to and we will point you at what fits.
    Common questions
    What does the glass / ceramic switch actually do?A toggle on the control panel selects which set of elements does the work. Up is glass mode: the lid coils fire from above and wash the shelf in even heat, which is what fused and slumped glass needs, with the middle-side coils helping the chamber come up to temperature. Down is ceramic mode: the side coils take over for the side firing that clay and glaze want. It is one kiln with two element circuits, not a compromise between them.
    Which electrical build should I order?Jen-Ken builds this kiln two ways. The 45-amp build is 10,800W and plugs into a NEMA 6-50R. The 55-amp build is 13,200W and is hard-wired — no plug — with #6 copper. Both go behind a 60A breaker. The 55-amp build heats faster and holds a soak harder on a chamber this size; the 45-amp build is the one to take if you want a receptacle rather than a direct connection. Tell us which you want when you order, because it is built in.
    Why is there no wire gauge for the 45-amp build?Because Jen-Ken does not publish one for it. They publish #6 for the 55-amp build only, and we are not going to carry that figure across to a different build and present it as theirs. Your electrician will size the conductors to the 45-amp continuous load and the 60A breaker; call us and we will confirm the factory's number before you wire anything.
    Is the breaker really 60 amps?Jen-Ken's current product page specifies a 60A breaker for this kiln. The older wiring table in their general owner's manual shows 50A for the same model. We publish the 60A, because a kiln is a continuous load and a 45-amp continuous draw has to sit behind at least 56.25 amps of protection — which makes 60A the right number and 50A the stale one. Have a licensed electrician confirm it against your local code, and call us if the two figures cause you any trouble with an inspector.
    What cone will it reach?Jen-Ken publishes no cone rating for this model and we have not invented one. Ceramic mode stops at 2,150°F, which covers low-fire and mid-range clay, glaze and casting — not cone 6 stoneware.
    Is the capacity really 9.33 cubic feet?Yes, and it is worth saying because Jen-Ken's own documents disagree elsewhere. Some of their pages give 14 cubic feet for a 39" x 24" x 18" oval chamber, which is not possible — that box is only 9.75 cubic feet even if it were square, and 14 is the figure belonging to the taller 27" oval. The 9.33 we publish is Jen-Ken's own figure for this model, and it is the one that matches the chamber. Size your shelf order to it.
    What actually comes in the crate?Jen-Ken lists the controller, a kiln stand, kiln wash, lid lifters and the two-year warranty for this model. We do not want to guess beyond that list — call or email us and we will confirm before you order.
    How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
    Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory two-year warranty applies exactly as it would buying direct. Keep your proof of purchase.
    Tell us what shape your work is. We are authorized Jen-Ken dealers based in Georgia. An oval is the right kiln for long panels and awkward shapes and the wrong one for everything else. Call us and we will tell you which way it falls for you — and which electrical build to order.
    Talk to an expert →