Jen-Ken Ceram-a-Glass 2422 Kiln
$3,959.00Regular price$4,251.00
Save $292.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton AutoFire® 3-Button Remote Controller

-
Orton AutoFire® 12-Button Remote Controller

-
Orton AutoFire® Slide Remote Controller

-
SDS Industries TAP II Remote Controller

-
Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

Jen-Ken Ceram-a-Glass 242...
$3,959.00
Overview
Jen-Ken · Ceram-a-Glass · Dual-Media Kiln
Jen-Ken Ceram-a-Glass 2422 Kiln
The 2422 is where the Ceram-a-Glass line becomes a working studio kiln rather than a hobby one. Two separate element sets and a toggle switch: lid coils firing down for glass fusing and slumping to 1,700°F, side coils firing in for ceramics and glaze to 2,150°F. The 24" x 22" chamber takes a 21" full round shelf, and the 22-inch depth means you can reach the bottom of it without climbing in. It draws 36 amps firing glass and 42 firing ceramics, so the circuit gets sized to the ceramic figure.
FiresGlass + ceramics
Max Temp1,700°F / 2,150°F
Chamber24" x 22"
Power240V · 42A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
The controller you orderJen-Ken fits the controller you pick when the order goes in — the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model. Jen-Ken’s own page names the Orton AF3C 3-button as this model’s standard board, but their dealer price sheet prices only the controllers above for it, so ask us and we will confirm with the factory before your order goes in.
Cord and plug — NEMA 6-50PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Kiln standJen-Ken lists the stand with this model. It lifts the kiln off the floor for airflow and brings the chamber to a workable loading height.
Kiln washShelf primer, included by Jen-Ken with this model. Glass in particular will weld itself to an unprimed shelf.
Lid liftersJen-Ken lists lid lifters with this model, so the lid counterbalances instead of being hauled by hand.
2-year limited warrantyTwo years, direct from the Jen-Ken factory to the original purchaser and honoured through us as the dealer. Keep your proof of purchase.
Not included — kiln furnitureNo shelves or posts in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
Key features
Glass / ceramic switchTwo element circuits and a toggle that chooses between them — lid coils for glass, side coils for ceramics. This is the whole point of the Ceram-a-Glass line.
Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
Chamber size24" x 22" — 5.75 cu ft. That is the space you actually have to load.
Maximum temperature1,700°F (927°C) in glass mode, 2,150°F (1,177°C) in ceramic mode.
Technical specifications
ModelCAG 2422
Kiln functionGlass fusing and slumping; ceramics, clay and glazing
Chamber dimensions24" x 22"
Cubic feet5.75 cu ft
Maximum temperature — glass mode1,700°F (927°C)
Maximum temperature — ceramic mode2,150°F (1,177°C)
Firing modesGlass / ceramic switch — lid coils for glass, side coils for ceramics
Shelf it takes21" full round shelf, or square work to 14.8" x 14.8"
Voltage240V
Amperage36A in glass mode, 42A in ceramic mode
Wattage8,640W (glass mode)
PhaseSingle phase
ReceptacleNEMA 6-50R
Breaker (fuse) size50A — sized to the 42A ceramic draw
Circuit wire gauge#6 copper
Element placementTop and side — lid coils in glass mode, side coils in ceramic mode
LoadingTop-loading, with lid lifters
ControllerOrton AF3C 3-button (standard)
Overall dimensions33" x 38" x 27"
Kiln weight275 lbs
Estimated shipping weight260 lbs
Shipping methodMotor freight
Warranty2-year limited (Jen-Ken)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf; ceramics want posts and stacking space. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln.
Controller upgradeJen-Ken offers the AutoFire Slide and the TAP II touchscreen in place of the standard controller. It is a factory option, not a checkout add-on — call us and we will quote it.
Kiln wash and shelf primerBeyond the starter kiln wash Jen-Ken includes, most glass workers go through primer steadily. Worth adding to a first order.
Fusing and slumping mouldsSlumping moulds and fibre paper are the other half of a glass setup. Tell us the shelf size you are working to and we will point you at what fits.
Common questions
What does the glass / ceramic switch actually do?A toggle on the control panel selects which set of elements does the work. Up is glass mode: the lid coils fire from above and wash the shelf in even heat, which is what fused and slumped glass needs, with the middle-side coils helping the chamber come up to temperature. Down is ceramic mode: the side coils take over for the side firing that clay and glaze want. It is one kiln with two element circuits, not a compromise between them.
What electrical circuit does it need?Size it to the ceramic draw, not the glass draw. This kiln pulls 36A when the lid coils are firing glass and 42A when the side coils are firing ceramics, and the circuit has to carry the larger of the two: 240V single phase, NEMA 6-50R receptacle, 50A breaker, #6 copper. That is what Jen-Ken's standard 2422 page specifies and what the wiring table in their owner's manual specifies, and it is what we publish on both the standard and the 3" build.
What cone will it reach?Jen-Ken publishes no cone rating for this model and we have not invented one. Ceramic mode tops out at 2,150°F, which is low-fire and mid-range clay and glaze — not cone 6 stoneware, and nowhere near cone 10. If you fire cone 6, buy an AF3C or a JK² instead and keep this kiln for glass.
How is this different from the 2422 3"?Three-inch brick instead of the standard wall, which Jen-Ken rates at roughly 20% more insulation, and lid lifters listed with it. Same chamber, same shelf, same electrical spec. The 3" build costs more and holds heat better; this one is the sensible buy if you are not firing several times a week.
What actually comes in the crate?Jen-Ken lists the controller, a kiln stand, kiln wash, lid lifters and the two-year warranty for this model. We do not want to guess beyond that list — call or email us and we will confirm exactly what is on the crate before you order.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory two-year warranty applies exactly as it would buying direct. Keep your proof of purchase.
Talk to us before you book the electrician.
We are authorized Jen-Ken dealers based in Georgia. This kiln has two operating draws and Jen-Ken's own pages do not agree on how to size the circuit. Call us and we will walk you and your electrician through it.
Talk to an expert →





