Jen-Ken Ceram-a-Glass 2422 3" Kiln
$4,349.00Regular price$4,731.00
Save $382.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

Jen-Ken Ceram-a-Glass 242...
$4,349.00
Overview
Jen-Ken · Ceram-a-Glass · Dual-Media Kiln
Jen-Ken Ceram-a-Glass 2422 3" Kiln
The 3-inch-brick build of the 2422, and the one to buy if the kiln is going to earn its keep. Same dual-media design — lid coils that fire down for glass to 1,700°F, side coils that fire in for ceramics to 2,300°F, and a toggle switch between them — but with thicker walls that hold heat through a long glass anneal and cost less to get back up to temperature. The 24" x 22" chamber takes a 21" full round shelf, and lid lifters make a heavy 3-inch lid manageable.
FiresGlass + ceramics
Max Temp1,700°F / 2,300°F
Chamber24" x 22"
Power240V · 42A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
The controller you orderJen-Ken fits the controller you pick when the order goes in — the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
Cord and plug — NEMA 6-50PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Kiln standJen-Ken lists the stand with this model. It lifts the kiln off the floor for airflow and brings the chamber to a workable loading height.
Kiln washShelf primer, included by Jen-Ken with this model. Glass in particular will weld itself to an unprimed shelf.
Lid lifterJen-Ken's dealer sheet lists this model as including the lid lifter — the spring assist that takes most of the weight out of raising the lid.
2-year limited warrantyJen-Ken's brick-kiln warranty, direct from the factory to the original purchaser.
Not included — kiln furnitureNo shelves or posts in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
Key features
Glass / ceramic switchTwo element circuits and a toggle that chooses between them — lid coils for glass, side coils for ceramics. This is the whole point of the Ceram-a-Glass line.
Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
Chamber size24" x 22" — 5.75 cu ft. That is the space you actually have to load.
Maximum temperature1,700°F (927°C) in glass mode, 2,300°F (1,260°C) in ceramic mode.
Technical specifications
ModelCAG 2422 3"
Kiln functionGlass fusing and slumping; ceramics, clay and glazing
Chamber dimensions24" x 22"
Cubic feet5.75 cu ft
Brick3" firebrick
Maximum temperature — glass mode1,700°F (927°C)
Maximum temperature — ceramic mode2,300°F (1,260°C)
Cone ratingCone 8 (ceramic mode)
Firing modesGlass / ceramic switch — lid coils for glass, side coils for ceramics
Shelf it takes21" full round shelf, or square work to 14.8" x 14.8"
Voltage240V
Amperage36A in glass mode, 42A in ceramic mode
Wattage8,640W (glass mode)
PhaseSingle phase
ReceptacleNEMA 6-50R
Breaker (fuse) size50A — sized to the 42A ceramic draw
Circuit wire gauge#6 copper
Element placementTop and side — lid coils in glass mode, side coils in ceramic mode
LoadingTop-loading, with lid lifters
ControllerOrton AF3C 3-button (standard); Orton AutoFire 12-button as pictured
Overall dimensions33" x 45" x 33"
Kiln weight300 lbs
Estimated shipping weight280 lbs
Shipping methodMotor freight
Warranty2-year limited (Jen-Ken)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf; ceramics want posts and stacking space. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln.
Controller upgradeJen-Ken offers the AutoFire Slide and the TAP II touchscreen in place of the standard controller. It is a factory option, not a checkout add-on — call us and we will quote it.
Kiln wash and shelf primerBeyond the starter kiln wash Jen-Ken includes, most glass workers go through primer steadily. Worth adding to a first order.
Fusing and slumping mouldsSlumping moulds and fibre paper are the other half of a glass setup. Tell us the shelf size you are working to and we will point you at what fits.
Common questions
What does the glass / ceramic switch actually do?A toggle on the control panel selects which set of elements does the work. Up is glass mode: the lid coils fire from above and wash the shelf in even heat, which is what fused and slumped glass needs, with the middle-side coils helping the chamber come up to temperature. Down is ceramic mode: the side coils take over for the side firing that clay and glaze want. It is one kiln with two element circuits, not a compromise between them.
What electrical circuit does it need?Size it to the ceramic draw, not the glass draw. This kiln pulls 36A when the lid coils are firing glass and 42A when the side coils are firing ceramics, and the circuit has to carry the larger of the two: 240V single phase, NEMA 6-50R receptacle, 50A breaker, #6 copper. That is what Jen-Ken's standard 2422 page specifies and what the wiring table in their owner's manual specifies, and it is what we publish on both the standard and the 3" build.
Why do your breaker and wire figures differ from Jen-Ken's page for this model?Because Jen-Ken's 3" page gets it wrong, and we are not going to repeat it. That page lists only the 36-amp glass figure and then sizes the circuit to it — a 40A breaker and #8 wire — while still calling for a NEMA 6-50R, which is a 50-amp device. Two things are wrong with that. A 6-50R does not belong on a 40-amp circuit, and sizing a dual-media kiln's circuit to its lighter duty cycle leaves you under-protected the first time you fire ceramics at 42 amps. Jen-Ken's own current price list gives the standard and the 3" build identical electrical specs, and their owner's manual gives this model #6 wire and a 50A fuse. So we publish 50A and #6 on both, and we do not publish the 40A or the #8 at all.
What cone will it reach?Cone 8. Jen-Ken’s website rates this kiln cone 8 but prints 2,150°F beside it, and those two do not agree — cone 8 matures around 2,280°F. Jen-Ken’s September 2025 dealer price list settles it: the 3-inch-brick Ceram-a-Glass models are rated to 2,300°F in ceramic mode, not 2,150°F. At 2,300°F the cone 8 rating holds, and the figure on their web page is the one that is wrong. That puts mid-range stoneware and cone 6 glaze comfortably in range. It is still not a cone 10 kiln.
Is the 3-inch brick worth the difference?If you anneal thick glass or fire more than about once a week, yes — thicker walls hold a soak more steadily and cost less in power. If you fire occasionally, the standard 2422 has the same chamber and the same shelf for less money.
What actually comes in the crate?Jen-Ken’s dealer price sheet for this model lists the lid lifter as part of the kiln, and their own model description refers to it, so it is on the crate list above. The shorter list on their website leaves it out. Call or email us if you want the crate confirmed against your build before you order.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory two-year warranty applies exactly as it would buying direct. Keep your proof of purchase.
Talk to us before you book the electrician.
We are authorized Jen-Ken dealers based in Georgia. Jen-Ken's page for this kiln sizes the circuit to its glass draw and not its ceramic draw. We publish the corrected figures — call us and we will confirm them with the factory for your install.
Talk to an expert →
