Black Friday Kiln Sale ends in
09Days: 01Hrs: 56Min: 41Sec
$125 off $1,500+ $250 off $3,000+ $500 off $5,000+
Save up to $500No code needed · applied at checkout
Shop kilns

Jen-Ken Ceram-a-Glass 1815 Ceramic & Glass Kiln - 240V, 1700°F glass / 2150°F ceramic, 18" dia x 15" deep

Jen-KenElectric KilnSKU JENKEN-CAG-1815
$2,469.00Regular price$2,536.00
Save $67.00

  • 15-day returns
  • No sales tax outside Georgia
  • Made in USA
Configure your kiln Not sure? Call 470-264-3563
Furniture kit

1815 Ceram-a-Glass is the size our records hold for this kiln. Change it here if your chamber is a different size, or call us and we will check it with you.

  • Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

    Shipping is chosen at checkout: free curbside freight, or Freight + Liftgate Delivery for $139.

    Freight is free and curbside, without a liftgate: plan on a loading dock, a forklift or 2 or more helpers. Or choose Freight + Liftgate Delivery at checkout, $139.

    Jen-Ken Ceram-a-Glass 181...
    $2,469.00
    Call

    Overview

    Jen-Ken · Ceram-a-Glass · Dual-Media Kiln Jen-Ken Ceram-a-Glass 1815 Kiln Model CAG 1815 · 240V · 18" x 15" chamber · 1,700°F glass / 2,150°F ceramic The Ceram-a-Glass 1815 fires clay and glass from the same box using two separate sets of elements. Coils in the lid fire down onto the shelf for fusing and slumping to 1,700°F; coils in the walls fire from the side for ceramics and glaze to 2,150°F; a toggle switch chooses between them. The 18" x 15" chamber takes a 15" full round shelf or square work to 10.5", and the 26-amp draw still sits on the 30-amp dryer-class circuit the smaller 1513 uses — so you get a usefully bigger shelf without touching your electrical service.
    FiresGlass + ceramics
    Max Temp1,700°F / 2,150°F
    Chamber18" x 15"
    Power240V · 26A
    What’s included
    The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
    The controller you orderJen-Ken fits the controller you pick when the order goes in — the AF3C 3-button, the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
    Cord and plug — NEMA 6-30PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
    Kiln standJen-Ken lists the stand with this model. It lifts the kiln off the floor for airflow and brings the chamber to a workable loading height.
    Kiln washShelf primer, included by Jen-Ken with this model. Glass in particular will weld itself to an unprimed shelf.
    Instruction manualJen-Ken's printed manual, with firing schedules and the electrical requirements for this model.
    2-year limited warrantyJen-Ken's brick-kiln warranty, direct from the factory to the original purchaser.
    Not included — kiln furnitureNo shelves or posts in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
    Key features
    Glass / ceramic switchTwo element circuits and a toggle that chooses between them — lid coils for glass, side coils for ceramics. This is the whole point of the Ceram-a-Glass line.
    Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
    Chamber size18" x 15" — 2.21 cu ft. That is the space you actually have to load.
    Maximum temperature1,700°F (927°C) in glass mode, 2,150°F (1,177°C) in ceramic mode.
    Technical specifications
    ModelCAG 1815
    Kiln functionGlass fusing and slumping; ceramics, clay and glazing
    Chamber dimensions18" x 15"
    Cubic feet2.21 cu ft
    Maximum temperature — glass mode1,700°F (927°C)
    Maximum temperature — ceramic mode2,150°F (1,177°C)
    Firing modesGlass / ceramic switch — lid coils for glass, side coils for ceramics
    Shelf it takes15" full round shelf, or square work to 10.5" x 10.5"
    Voltage240V
    Amperage26A
    Wattage6,240W
    PhaseSingle phase
    ReceptacleNEMA 6-30R
    Breaker (fuse) size30A
    Circuit wire gaugeContact us — see note below
    Element placementTop and side — lid coils in glass mode, side coils in ceramic mode
    LoadingTop-loading, lid
    ControllerOrton AF3C 3-button (AF4X)
    Overall dimensions23" x 20"
    Kiln weight150 lbs
    Estimated shipping weight200 lbs
    Shipping methodMotor freight
    Warranty2-year limited (Jen-Ken)
    Warranty: Two-year limited warranty from Jen-Ken Kilns to the original purchaser on brick kilns, covering defects in materials and workmanship and limited to repair or replacement of defective items. Elements and thermocouples carry their own two-year coverage; thermocouples are not warranted against breakage. The Orton controller is covered by Orton's own warranty. Keep your proof of purchase. Peach State Pottery is an authorized Jen-Ken dealer.
    Optional accessories
    Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf; ceramics want posts and stacking space. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln.
    Controller upgradeJen-Ken offers the AutoFire Slide and the TAP II touchscreen in place of the standard controller. It is a factory option, not a checkout add-on — call us and we will quote it.
    Kiln wash and shelf primerBeyond the starter kiln wash Jen-Ken includes, most glass workers go through primer steadily. Worth adding to a first order.
    Fusing and slumping mouldsSlumping moulds and fibre paper are the other half of a glass setup. Tell us the shelf size you are working to and we will point you at what fits.
    Common questions
    What does the glass / ceramic switch actually do?A toggle on the control panel selects which set of elements does the work. Up is glass mode: the lid coils fire from above and wash the shelf in even heat, which is what fused and slumped glass needs, with the middle-side coils helping the chamber come up to temperature. Down is ceramic mode: the side coils take over for the side firing that clay and glaze want. It is one kiln with two element circuits, not a compromise between them.
    What electrical circuit does it need?240V single phase, 26A, 6,240W, on a NEMA 6-30R receptacle behind a 30A breaker, on its own dedicated run. Jen-Ken's product page and the wiring table in their owner's manual agree on both the receptacle and the breaker for this model.
    Why is there no wire gauge in the spec table?Because Jen-Ken's two sources disagree about it. Their product page specifies #10 copper; the wiring table in their own owner's manual specifies #6 for the whole Ceram-a-Glass line. Rather than print a number that could be wrong on the one line your electrician will read, we have asked the factory and left the cell blank. Call or email us before anything is wired.
    How much bigger is it than the 1513, really?2.21 cubic feet against 1.33, and a 15" round shelf against a 13". The more useful difference is square work: 10.5" against 9". It draws 4 amps more and runs on the same 30-amp circuit, so the step up costs you nothing electrically.
    What cone will it reach?Jen-Ken publishes no cone rating for this model, so we have not invented one. 2,150°F in ceramic mode is the figure to plan against — low-fire and mid-range clay and glaze, not cone 6 stoneware. Ask us and we will get the working cone rating from the factory.
    What actually comes in the crate?Jen-Ken lists the controller, a kiln stand, kiln wash and the two-year warranty for this model. We do not want to guess beyond that list — call or email us and we will confirm exactly what is on the crate before you order.
    How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
    Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory two-year warranty applies exactly as it would buying direct. Keep your proof of purchase.
    Deciding between the 1513 and the 1815? We are authorized Jen-Ken dealers based in Georgia. The two run on the same circuit, so the question is purely how big your work is. Tell us what you make and we will tell you which shelf you actually need.
    Talk to an expert →