Jen-Ken Bonnie Glo Tall Glass Kiln - 120V, 1700°F, 15" dia x 9" deep
$1,609.00Regular price$1,664.00
Save $55.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton AutoFire® 3-Button Remote Controller

-
Orton AutoFire® 12-Button Remote Controller

-
Orton AutoFire® Slide Remote Controller

-
SDS Industries TAP II Remote Controller

Jen-Ken Bonnie Glo Tall G...
$1,609.00
Overview
Jen-Ken · Glass Kiln · Bonnie Glo Fiber
Jen-Ken Bonnie Glo Tall Glass Kiln
The Bonnie Glo Tall is the same idea as the standard Bonnie Glo with three more inches of chamber: rigid fiber rather than brick, so almost nothing heats up except the glass, and fast enough to fire two or three times in a day. Nine inches of height is what the extra money buys, and it is the difference between shallow slumps and being able to stand a proper draping mould or a floral form up inside. At 35 lbs on a normal wall outlet it is still a kiln you can carry, which is why teachers and studios that fire around a day job buy it. The chamber is 15 inches across and 9 deep — 0.92 cubic feet — and it is rated 1,700°F, so it fuses and slumps but will not cast and will not fire clay.
Max Temp1,700°F
Chamber15" x 9"
Capacity0.92 cu ft
Power120V · 13A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships boxed by UPS.
The controller you orderJen-Ken fits the controller you pick when the order goes in — the AF3P 3-button, the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
Cord and plug — NEMA 5-15PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Kiln standOn Jen-Ken's included list for the Tall. It lifts the kiln off the bench for airflow and brings the chamber to a workable height.
Kiln washA starter supply of shelf primer is included with this model — glass welds itself to an unprimed shelf.
Instruction manualJen-Ken's printed manual, with firing schedules and the electrical requirements for this model.
Warranty — 1 year kiln, 2 years controllerJen-Ken covers the kiln for one year on this model and Orton covers the controller for two. Keep your proof of purchase.
Not included — kiln furnitureNo shelves or posts in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
Key features
All-fiber chamberRigid fiber rather than brick. Almost no thermal mass, which is the whole reason the kiln fires and cools fast enough to run two or three times a day.
9 inches of chamber heightThe reason to buy the Tall. Room for taller slumping projects and floral form moulds that the 6-inch Bonnie Glo will not take.
Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
Chamber size15" x 9" — 0.92 cu ft. That is the space you actually have to load.
Technical specifications
ModelAF3P — Bonnie Glo Tall
Kiln functionFiber fusing, slumping
Chamber dimensions15" x 9"
Cubic feet0.92 cu ft
Maximum temperature1,700°F (927°C)
ConstructionRigid fiber
Voltage120V
Amperage13A
Wattage1,560W
PhaseSingle phase
ReceptacleNEMA 5-15R
Breaker (fuse) size15A (Jen-Ken prefers 20A)
Circuit wire gauge#14
Element placementSide-fired
ControllerOrton AutoFire 3-button
Overall dimensions19" x 13"
Kiln weight35 lbs
Estimated shipping weight60 lbs
Shipping dimensions32" x 25" x 20"
Shipping methodUPS
Warranty1-year kiln (Jen-Ken) / 2-year controller (Orton)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf and fibre paper; casting wants posts and headroom. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln. Tell us your shelf size and we will match it.
Kiln wash and shelf primerGlass will weld itself to an unprimed shelf. Most glass workers go through primer steadily, so it is worth adding to a first order.
Slumping moulds and fibre paperMoulds and fibre paper are the other half of a warm-glass setup. Tell us the shelf size you are working to and we will point you at what fits.
Controller upgradeJen-Ken fits the Orton AutoFire 3-button as standard and offers the Orton AutoFire Slide touchscreen and the SDS TAP II in its place. It is a factory option rather than a checkout add-on — call us and we will quote it.
Common questions
What electrical circuit does it need?120V single phase, a 13-amp draw and 1,560 watts on an ordinary NEMA 5-15R three-prong outlet. Jen-Ken gives the breaker as 15 amps with 20 amps preferred, and the circuit wire gauge as #14. We would take the 20-amp advice, and here is the arithmetic behind that: a kiln is a continuous load, and the 125% rule puts a 13-amp draw at 16.25 amps — over a 15-amp breaker. The catch is that #14 copper is only rated for 15 amps, so a 20-amp circuit needs #12, not the #14 Jen-Ken lists. Those two published figures are the 15-amp pairing; if your electrician runs the preferred 20-amp circuit, have them run #12 with it. Either way give it a dedicated outlet with nothing else on it.
Why fiber instead of brick?Fiber has almost no thermal mass, so almost all the energy goes into the glass rather than into heating the kiln structure. Jen-Ken's own framing for the Bonnie Glo line is two to three firings a day — start a firing after work, finish by bedtime, cool overnight — and pendants in under an hour. That is not something a brick kiln of the same size will do. The trade-offs are a softer interior that does not take knocks the way brick does, a 1,700°F ceiling so no casting and no clay, and a one-year kiln warranty rather than two.
What cone will it reach?Jen-Ken publishes no cone rating for any kiln in their glass line, and we have not invented one. What is published is the maximum temperature, which is in the table above. Cone numbers are a ceramics measure; for glass work the temperature and the firing schedule are what matter.
How is this different from the standard Bonnie Glo?Height only. Same 15-inch chamber diameter, same 120V 13-amp circuit, same 1,700°F, same fiber construction, same warranty terms. This one is 9 inches deep at 0.92 cubic feet; the standard is 6 inches at 0.61. The Tall also includes a kiln stand and kiln wash, which the standard does not. Jen-Ken's own pitch for the Tall is taller slumping projects and floral form moulds — if all your work is flat, the standard saves you money.
Will it fire clay?No. 1,700°F is a glass ceiling and a fiber chamber is not built for clay dust and glaze. For clay, look at Jen-Ken's ceramic line or the Ceram-a-Glass models, which they rate to 2,100°F and above and list for both media.
Is it really good for two or three firings a day?That is Jen-Ken's own claim for the line and it follows from the construction. A fiber chamber holds very little heat, so it climbs fast and drops fast — the constraint on turning work around becomes the annealing schedule your glass needs, not the kiln cooling down. Jen-Ken quotes pendants in under an hour. The practical caveat is that fiber is softer than brick, so it wants a bit more care in loading and unloading than a brick chamber does.
What actually comes in the crate?Jen-Ken lists the Orton AutoFire 3-button controller, a kiln stand, kiln wash, the instruction manual and the warranty. A shelf is not on that list, so ask us and we will put one in with the kiln so you can fire it the day it arrives.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory warranty applies exactly as it would buying direct. Note the split: Jen-Ken warrants fiber kilns for one year and brick kilns for two, and this is a fiber kiln. The controller's own two-year warranty comes from Orton, not Jen-Ken. Keep your proof of purchase.
Six inches or nine?
We are authorized Jen-Ken dealers based in Georgia. Tell us what you are making and what power you have available, and we will tell you straight whether this is the right kiln — including when a cheaper one would do.
Talk to an expert →



