Jen-Ken Bonnie Glo Glass Kiln
$1,479.00Regular price$1,523.00
Save $44.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton AutoFire® 3-Button Remote Controller

-
Orton AutoFire® 12-Button Remote Controller

-
Orton AutoFire® Slide Remote Controller

-
SDS Industries TAP II Remote Controller

Jen-Ken Bonnie Glo Glass ...
$1,479.00
Overview
Jen-Ken · Glass Kiln · Bonnie Glo Fiber
Jen-Ken Bonnie Glo Glass Kiln
The Bonnie Glo is built around one idea: fire it more than once a day. It is rigid fiber rather than brick, so the chamber is essentially pure insulation with nothing much to heat up — Jen-Ken's line is that only the glass gets hot — and it climbs and cools fast enough for two or three firings in a day, or a pendant in under an hour. That makes it the kiln for people who fuse around a job: start a firing in the evening, finish before bed, unload in the morning. It is 25 lbs, it plugs into a wall outlet, and the lid hinges and props so you load it one-handed. The chamber is 15 inches across and 6 deep, which suits jewellery, tiles, small plates and flat panels. If you slump into taller moulds, the Bonnie Glo Tall is the same kiln with nine inches of height.
Max Temp1,700°F
Chamber15" x 6"
Capacity0.61 cu ft
Power120V · 13A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships boxed by UPS.
Orton AutoFire AF3P 3-button controllerFitted and wired at the factory. Jen-Ken lists one controller for this model, so there is nothing to choose.
Cord and plug — NEMA 5-15PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Instruction manualJen-Ken's printed manual, including firing guidance and their electrical requirements.
Warranty — 1 year kiln, 2 years controllerJen-Ken covers the kiln for one year on this model and Orton covers the controller for two. Keep your proof of purchase.
Not included — kiln furnitureNo shelves, posts or kiln wash in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
Key features
All-fiber chamberRigid fiber rather than brick. Almost no thermal mass, which is the whole reason the kiln fires and cools fast enough to run two or three times a day.
Hinged, propping lidThe lid hinges and props open, so you can load and check a firing one-handed rather than lifting a lid clear.
25 lbsLight enough to move between a bench and a classroom without a trolley, and light enough to take to a workshop.
Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
Technical specifications
ModelThe Bonnie Glo — 15" x 6"
Kiln functionFiber fusing, slumping
Chamber dimensions15" x 6"
Cubic feet0.61 cu ft
Maximum temperature1,700°F (927°C)
ConstructionRigid fiber
Voltage120V
Amperage13A
Wattage1,560W
PhaseSingle phase
ReceptacleNEMA 5-15R
Breaker (fuse) size15A (Jen-Ken prefers 20A)
Circuit wire gauge#14
Element placementSide-fired
LoadingTop-loading, hinged lid with prop
ControllerOrton AutoFire 3-button
Overall dimensions19" x 10"
Kiln weight25 lbs
Estimated shipping weight50 lbs
Shipping methodUPS
Warranty1-year kiln (Jen-Ken) / 2-year controller (Orton)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf and fibre paper; casting wants posts and headroom. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln. Tell us your shelf size and we will match it.
Kiln wash and shelf primerGlass will weld itself to an unprimed shelf. Most glass workers go through primer steadily, so it is worth adding to a first order.
Slumping moulds and fibre paperMoulds and fibre paper are the other half of a warm-glass setup. Tell us the shelf size you are working to and we will point you at what fits.
Controller upgradeJen-Ken fits the Orton AutoFire 3-button as standard and offers the Orton AutoFire Slide touchscreen and the SDS TAP II in its place. It is a factory option rather than a checkout add-on — call us and we will quote it.
Common questions
What electrical circuit does it need?120V single phase, a 13-amp draw and 1,560 watts on an ordinary NEMA 5-15R three-prong outlet. Jen-Ken gives the breaker as 15 amps with 20 amps preferred, and the circuit wire gauge as #14. We would take the 20-amp advice, and here is the arithmetic behind that: a kiln is a continuous load, and the 125% rule puts a 13-amp draw at 16.25 amps — over a 15-amp breaker. The catch is that #14 copper is only rated for 15 amps, so a 20-amp circuit needs #12, not the #14 Jen-Ken lists. Those two published figures are the 15-amp pairing; if your electrician runs the preferred 20-amp circuit, have them run #12 with it. Either way give it a dedicated outlet with nothing else on it.
Why fiber instead of brick?Fiber has almost no thermal mass, so almost all the energy goes into the glass rather than into heating the kiln structure. Jen-Ken's own framing for the Bonnie Glo line is two to three firings a day — start a firing after work, finish by bedtime, cool overnight — and pendants in under an hour. That is not something a brick kiln of the same size will do. The trade-offs are a softer interior that does not take knocks the way brick does, a 1,700°F ceiling so no casting and no clay, and a one-year kiln warranty rather than two.
What cone will it reach?Jen-Ken publishes no cone rating for any kiln in their glass line, and we have not invented one. What is published is the maximum temperature, which is in the table above. Cone numbers are a ceramics measure; for glass work the temperature and the firing schedule are what matter.
Will it fire clay?No. 1,700°F is a glass ceiling and a fiber chamber is not built for clay dust and glaze. If you want to fire clay, look at Jen-Ken's ceramic line or the Ceram-a-Glass models, which they rate to 2,100°F and above and list for both media.
How big a piece will it take?The chamber is 15 inches across and 6 inches deep. That is comfortable for jewellery runs, tiles, coasters, small plates and flat panels up to about that diameter. Six inches of height limits you to shallow slumps — for taller moulds and floral forms, the Bonnie Glo Tall gives you nine.
How is this different from the Bonnie Glo Tall?Height only. Same 15-inch chamber, same 120V 13-amp circuit, same 1,700°F, same fiber construction, same warranty. This one is 6 inches deep at 0.61 cubic feet; the Tall is 9 inches at 0.92. The Tall also ships with a kiln stand and kiln wash, which this one does not. Buy this one for flat work and jewellery; buy the Tall if you slump into moulds.
What actually comes in the crate?Jen-Ken's list for this model is the Orton AutoFire 3-button controller, the instruction manual and the warranty — note that a stand and a shelf are not on it. Call or email us and we will confirm before you order, and put a shelf and primer in with the kiln so you can fire it the day it arrives.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory warranty applies exactly as it would buying direct. Note the split: Jen-Ken warrants fiber kilns for one year and brick kilns for two, and this is a fiber kiln. The controller's own two-year warranty comes from Orton, not Jen-Ken. Keep your proof of purchase.
Want to fire more than once a day?
We are authorized Jen-Ken dealers based in Georgia. Tell us what you are making and what power you have available, and we will tell you straight whether this is the right kiln — including when a cheaper one would do.
Talk to an expert →




