Jen-Ken AF3P 2415 Glass/Casting Kiln
$3,709.00Regular price$3,978.00
Save $269.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton AutoFire® 3-Button Remote Controller

-
Orton AutoFire® 12-Button Remote Controller

-
Orton AutoFire® Slide Remote Controller

-
SDS Industries TAP II Remote Controller

-
Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

Jen-Ken AF3P 2415 Glass/C...
$3,709.00
Overview
Jen-Ken · Glass Kiln · AF3P Glass/Casting
Jen-Ken AF3P 2415 Glass/Casting Kiln
The 2415 is where the Glass/Casting line becomes a production kiln. A 24-inch shelf takes work that simply will not fit an 18-inch chamber — platters, long panels, several pieces at once — and the 15 inches of height still leaves room for a casting mould underneath. It fires top-and-side together for fusing at 1,700°F and side only for casting and low-fire clay at 2,150°F. At 33 amps on a NEMA 6-50R it is a proper studio circuit, and at 200 lbs it is sited once and left there.
FiresGlass, casting, low-fire clay
Max Temp1,700°F / 2,150°F
Chamber24" x 15"
Power240V · 33A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
The controller you orderJen-Ken fits the controller you pick when the order goes in — the AF3P 3-button, the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
Cord and plug — NEMA 6-50PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Lid lifterJen-Ken's dealer sheet lists this model as including the lid lifter — the spring assist that takes most of the weight out of raising the lid.
2-year limited warrantyJen-Ken's brick-kiln warranty, direct from the factory to the original purchaser.
Not included — kiln furnitureNo shelves, posts or kiln wash in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
Key features
Selectable top/side and side firingThe feature that makes it two kilns: top and side together for fusing, side alone for casting and clay.
24-inch shelfThe step up that matters. Platters, long panels and multi-piece loads that an 18-inch chamber will not take.
Built to order in FloridaAssembled in Jen-Ken's own Lakeland shop rather than drop-shipped from a distributor.
Chamber size24" x 15" — 3.9 cu ft. That is the space you actually have to load.
Technical specifications
ModelAF3P 2415 Glass/Casting
Kiln functionGlass casting, fusing, slumping, low-fire ceramics
Chamber dimensions24" x 15"
Cubic feet3.9 cu ft
Maximum temperature — glass1,700°F (927°C)
Maximum temperature — casting2,150°F (1,177°C)
Firing modesTop/side together for glass, side only for casting and clay
Voltage240V
Amperage33A
Wattage7,920W
PhaseSingle phase
ReceptacleNEMA 6-50R
Breaker (fuse) size40A — see the note below
Circuit wire gauge#8
Element placementTop/side and side — selectable
ControllerOrton AutoFire 3-button
Kiln weight200 lbs
Estimated shipping weight300 lbs
Shipping methodMotor freight
Warranty2-year limited (Jen-Ken)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf and fibre paper; casting wants posts and headroom. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln. Tell us your shelf size and we will match it.
Kiln wash and shelf primerGlass will weld itself to an unprimed shelf. Most glass workers go through primer steadily, so it is worth adding to a first order.
Slumping moulds and fibre paperMoulds and fibre paper are the other half of a warm-glass setup. Tell us the shelf size you are working to and we will point you at what fits.
Controller upgradeJen-Ken fits the Orton AutoFire 3-button as standard and offers the AutoFire Slide touchscreen and the SDS TAP II in its place. It is a factory option rather than a checkout add-on — call us and we will quote it.
Common questions
What does "Glass/Casting" actually mean?Two firing modes in one kiln. For fusing and slumping the elements fire from the top and the sides together, which washes a wide shelf in even heat — that is what flat glass wants, and the ceiling there is 1,700°F. For casting, the side elements do the work on their own and the kiln will go to 2,150°F, which is the range a casting mould and a long ramp need. You select the mode; it is one kiln with two ways of heating, not a compromise between them.
What electrical circuit does it need?240V single phase, a 33-amp draw, 7,920 watts, a NEMA 6-50R receptacle, a 40-amp breaker and #8 copper — that is what Jen-Ken publishes and what we have printed. One thing to put to your electrician: a kiln is a continuous load, and the usual 125% sizing rule puts a 33-amp continuous draw at 41.25 amps, which is just over the 40-amp breaker Jen-Ken specifies. Jen-Ken's own sources do not contradict each other here, so we have published their figure rather than withholding it, but this is a case where we would want a licensed electrician to sign off on the breaker before anything is wired. Call us if you would like us to put the question to the factory first.
What cone will it reach?Jen-Ken publishes no cone rating for any kiln in their glass line, this one included, and we have not worked one out from the temperature. What is published is the two ceilings — 1,700°F in glass mode and 2,150°F in casting mode — and those are in the table above. Treat 2,150°F as low-fire clay and glaze territory.
Will it fire clay?Low-fire clay and glaze, yes — Jen-Ken lists low-fire ceramics among this kiln's functions and 2,150°F is in that range. What it will not do is mid-fire or high-fire stoneware: cone 6 is out of reach, let alone cone 10. If pottery is the main event, buy a ceramic kiln and keep this one for glass. If you fire glass most of the time and want the option of a low-fire load, this is exactly the kiln for it.
How does it compare with the 2815 3"?Wider and thicker. The 2815 3" gives you 28 inches of shelf instead of 24 and three-inch brick instead of the standard wall, which Jen-Ken rates at roughly 20% more insulation, at the cost of a 45-amp circuit instead of 33. If you fire several times a week, the heavier brick pays back in element life and running cost; if you fire occasionally, this is the sensible buy.
What actually comes in the crate?The section at the top of this page is that list, and it comes from Jen-Ken’s own dealer price sheet for this model rather than from a guess. Kiln furniture is the thing most people assume is in the crate and is not — Jen-Ken prices the shelves and posts as a separate kit. Call or email us if you want the crate confirmed against your build before you order.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory warranty applies exactly as it would buying direct. Jen-Ken gives brick kilns two years. Keep your proof of purchase.
Talk to us before you book the electrician.
We are authorized Jen-Ken dealers based in Georgia. This kiln sits close to the limit of the breaker Jen-Ken specifies, so it is worth one phone call before the circuit goes in. Tell us what you make and we will tell you straight whether this is the right size.
Talk to an expert →




