Black Friday Kiln Sale ends in
09Days: 01Hrs: 56Min: 06Sec
$125 off $1,500+ $250 off $3,000+ $500 off $5,000+
Save up to $500No code needed · applied at checkout
Shop kilns

Jen-Ken AF3P 15/6 Glass Kiln - 120V, 1700°F, 15" x 6"

Jen-KenGlass KilnSKU JENKEN-AF3P-15-6
$1,479.00Regular price$1,523.00
Save $44.00

  • 15-day returns
  • No sales tax outside Georgia
  • Made in USA
Configure your kiln Not sure? Call 470-264-3563
Furniture kit

15/13 is the size our records hold for this kiln. Change it here if your chamber is a different size, or call us and we will check it with you.

    Shipping is chosen at checkout: free curbside freight, or Freight + Liftgate Delivery for $139.

    Freight is free and curbside, without a liftgate: plan on a loading dock, a forklift or 2 or more helpers. Or choose Freight + Liftgate Delivery at checkout, $139.

    Jen-Ken AF3P 15/6 Glass K...
    $1,479.00
    Call

    Overview

    Jen-Ken · Glass Kiln · AF3P Series Jen-Ken AF3P 15/6 Glass Kiln Model AF3P 15/6 · 120V · 15" x 6" chamber · 1,700°F The 15/6 is the biggest chamber Jen-Ken will put on a 120V circuit in this series — 15 inches across and 6 deep, with elements in both the top and the sides, which is what gives fused glass an even heat across a wide shelf. It is the sensible first kiln for someone who has outgrown the 11-inch models but does not want to pay an electrician. Jen-Ken builds it in two versions, a 15-amp and a 17-amp, and the two take different outlets, so it is worth deciding which before you order rather than after.
    Max Temp1,700°F
    Chamber15" x 6"
    Capacity0.66 cu ft
    Power120V · 15A or 17A
    What’s included
    The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
    The controller you orderJen-Ken fits the controller you pick when the order goes in — the AF3P 3-button or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
    Cord and plug — two buildsThe 15-amp build is wired with a NEMA 5-15P plug and the 17-amp build with a NEMA 5-20P. Both run on 120V. Say which one you need and we confirm it on the order.
    Instruction manualJen-Ken's printed manual, with firing schedules and the electrical requirements for this model.
    2-year limited warrantyJen-Ken's brick-kiln warranty, direct from the factory to the original purchaser.
    Not included — kiln furnitureNo shelves, posts or kiln wash in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
    Key features
    Top and side elementsElements above and around the work rather than in one plane only, which is what gives a wide shelf an even fuse.
    Runs on household power120V, so no service upgrade — though the 17-amp build needs a 20-amp outlet rather than a standard one.
    Built to order in FloridaAssembled in Jen-Ken's own Lakeland shop rather than drop-shipped from a distributor.
    Chamber size15" x 6" — 0.66 cu ft. That is the space you actually have to load.
    Technical specifications
    ModelAF3P 15/6 — available as a 15A or a 17A build
    Kiln functionFusing, slumping
    Chamber dimensions15" x 6"
    Cubic feet0.66 cu ft
    Maximum temperature1,700°F (927°C)
    Voltage120V
    Amperage15A or 17A, depending on the build
    Wattage1,800W (15A build) or 2,040W (17A build)
    PhaseSingle phase
    ReceptacleNEMA 5-15R on the 15A build, NEMA 5-20R on the 17A build
    Breaker (fuse) size20A — see the note below if you are ordering the 17A build
    Circuit wire gauge#12
    Element placementTop and side
    ControllerOrton AutoFire AF3P 3-button
    Kiln weight60 lbs
    Estimated shipping weight80 lbs
    Shipping dimensions30" x 30" x 20"
    Shipping methodMotor freight
    Warranty2-year limited (Jen-Ken)
    Warranty: Two-year limited warranty from Jen-Ken Kilns to the original purchaser on brick kilns, covering defects in materials and workmanship and limited to repair or replacement of defective items. Elements and thermocouples carry their own two-year coverage; thermocouples are not warranted against breakage. The Orton controller is covered by Orton's own warranty. Keep your proof of purchase. Peach State Pottery is an authorized Jen-Ken dealer.
    Optional accessories
    Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf and fibre paper; casting wants posts and headroom. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln. Tell us your shelf size and we will match it.
    Kiln wash and shelf primerGlass will weld itself to an unprimed shelf. Most glass workers go through primer steadily, so it is worth adding to a first order.
    Slumping moulds and fibre paperMoulds and fibre paper are the other half of a warm-glass setup. Tell us the shelf size you are working to and we will point you at what fits.
    Controller upgradeJen-Ken fits the Orton AutoFire AF3P 3-button as standard. Other AutoFire controllers are a factory option rather than a checkout add-on — call us and we will quote it.
    Common questions
    15 amps or 17 amps — which should I order?The 17-amp build puts 2,040 watts into the chamber instead of 1,800, so it climbs faster and holds better on a cold day. The cost is the outlet: 15 amps plugs into an ordinary NEMA 5-15R, 17 amps wants a NEMA 5-20R, which is the one with the sideways slot. If you already have a 20-amp outlet in the room, take the 17. If you do not, the 15 does the same firings a bit more slowly and saves you an electrician. Tell us which and we will order it that way — it is a factory build, not something we can change later.
    What electrical circuit does it need?120V single phase on its own dedicated circuit. Jen-Ken specifies a 20-amp breaker and #12 circuit wire for both builds. One thing to raise with your electrician if you are taking the 17-amp version: a kiln is a continuous load, and the usual 125% sizing rule puts a 17-amp continuous draw at 21.25 amps, which is more than a 20-amp breaker allows. Jen-Ken publishes 20 amps and we have printed what they publish, but we would not wire the 17-amp build without an electrician signing off on the breaker first. Call us if you want us to put the question to the factory before you order.
    What cone will it reach?Jen-Ken publishes no cone rating for any kiln in their glass line, and we have not invented one. What is published is the maximum temperature, which is in the table above. Cone numbers are a ceramics measure; for glass work the temperature and the firing schedule are what matter.
    What will it fire?Fusing and slumping to 1,700°F on a 15-inch shelf — plates, tiles, panels, jewellery runs, small slumped bowls. The 6-inch chamber height is the limit on how deep a mould you can use. It is not a casting kiln and it will not fire clay.
    What actually comes in the crate?The section at the top of this page is that list, and it comes from Jen-Ken’s own dealer price sheet for this model rather than from a guess. Kiln furniture is the thing most people assume is in the crate and is not — Jen-Ken prices the shelves and posts as a separate kit. Call or email us if you want the crate confirmed against your build before you order.
    How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
    Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory warranty applies exactly as it would buying direct. Jen-Ken gives brick kilns two years. Keep your proof of purchase.
    Outgrown an 11-inch kiln? We are authorized Jen-Ken dealers based in Georgia. Tell us what you are making and what power you have available, and we will tell you straight whether this is the right kiln — including when a cheaper one would do.
    Talk to an expert →