Jen-Ken AF3P 11/9 Glass Kiln with 4" Flip Door - 120V, 1500°F, 11" x 9"
$1,479.00Regular price$1,522.00
Save $43.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton AutoFire® 3-Button Remote Controller

-
Orton AutoFire® 12-Button Remote Controller

-
Orton AutoFire® Slide Remote Controller

-
SDS Industries TAP II Remote Controller

Jen-Ken AF3P 11/9 Glass K...
$1,479.00
Overview
Jen-Ken · Glass Kiln · AF3P Series
Jen-Ken AF3P 11/9 Glass Kiln with 4" Flip Door
This is Jen-Ken's annealer. An 11" x 9" chamber behind a 4-inch self-supported flip door, on a 120V 15-amp circuit — sized for a lampworking bench where hot beads and boro come off the torch and go straight into the kiln. The door is the point: four inches of opening that stays where you leave it, so you can load one-handed at temperature without dropping the chamber. Jen-Ken lists it for annealing and fusing, and rates it to 1,500°F, which is annealing and fusing territory rather than casting. At 50 lbs it ships UPS.
Max Temp1,500°F
Chamber11" x 9"
Capacity0.55 cu ft
Power120V · 15A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships boxed by UPS.
Orton AutoFire AF3P 3-button controllerFitted and wired at the factory. Jen-Ken lists one controller for this model, so there is nothing to choose.
Cord and plug — NEMA 5-15PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
Furniture kit includedJen-Ken includes the furniture kit with this model rather than pricing it separately — a clay shelf, the posts it needs and a bag of kiln wash.
Instruction manualJen-Ken's printed manual, with firing schedules and the electrical requirements for this model.
2-year limited warrantyJen-Ken's brick-kiln warranty, direct from the factory to the original purchaser.
Key features
4" self-supported flip doorA wide front door that holds its own position, so a hot chamber can be loaded one-handed straight off the torch.
Plugs into a normal outlet120V on a NEMA 5-15R. No electrician, no service upgrade — though Jen-Ken asks for a dedicated circuit behind it.
Built to order in FloridaAssembled in Jen-Ken's own Lakeland shop rather than drop-shipped from a distributor.
Chamber size11" x 9" — 0.55 cu ft. That is the space you actually have to load.
Technical specifications
ModelAF3P 11/9 with 4" flip door
Kiln functionAnnealing, fusing
Chamber dimensions11" x 9"
Cubic feet0.55 cu ft
Maximum temperature1,500°F (816°C) — the 4" flip door lowers the rating; see the note below
Voltage120V
Amperage15A
Wattage1,800W
PhaseSingle phase
ReceptacleNEMA 5-15R
Breaker (fuse) size20A recommended; Jen-Ken says 15A may be acceptable — call us to confirm
Circuit wire gauge#12
Element placementSide-fired
Loading4" self-supported flip door (front-opening)
ControllerOrton AutoFire AF3P 3-button
Overall dimensions11" x 16" x 14"
Kiln weight50 lbs
Estimated shipping weight70 lbs
Shipping dimensions26" x 26" x 20"
Shipping methodUPS
Warranty2-year limited (Jen-Ken)
Optional accessories
Kiln shelves, posts and a furniture kitGlass wants a flat, primed shelf and fibre paper; casting wants posts and headroom. Jen-Ken's own shelves and posts are sized to this chamber and we stock them alongside the kiln. Tell us your shelf size and we will match it.
Kiln wash and shelf primerGlass will weld itself to an unprimed shelf. Most glass workers go through primer steadily, so it is worth adding to a first order.
Bead mandrels and fibre blanketThe accessories that actually get used on an annealer. Tell us how you work and we will put a sensible starter list together.
Controller upgradeJen-Ken fits the Orton AutoFire AF3P 3-button as standard. Other AutoFire controllers are a factory option rather than a checkout add-on — call us and we will quote it.
Common questions
Why only 1,500°F?The 4-inch flip door. Jen-Ken de-rates its flip-door builds deliberately, and the bigger the door the deeper the de-rate — the 11/4.5 drops from 2,000°F to 1,700°F with a 2-inch door, and this one drops to 1,500°F with a 4-inch one. Their current glass price list carries it as its own row at 1,500°F. For annealing and tack or full fusing that is ample; for casting it is not, and you should be looking at a 15/9 Glass/Casting instead.
What electrical circuit does it need?120V single phase, 15 amps, 1,800 watts, on a NEMA 5-15R. Jen-Ken's guidance is "20A recommended; 15A may be acceptable — please call to confirm", with #12 circuit wire. Take the 20-amp advice on this one in particular: a 15-amp continuous draw on a 15-amp circuit has no margin at all. Dedicated outlet, nothing else on it.
What cone will it reach?Jen-Ken publishes no cone rating for any kiln in their glass line, and we have not invented one. What is published is the maximum temperature, which is in the table above. Cone numbers are a ceramics measure; for glass work the temperature and the firing schedule are what matter.
Is it big enough for a lampworking bench?An 11" x 9" chamber holds a working evening's beads comfortably and takes boro sections. It is a bench annealer, not a production one. If you are running a class or annealing sculptural work, tell us the piece size and we will size up.
What actually comes in the crate?The section at the top of this page is that list, and it comes from Jen-Ken’s own dealer price sheet for this model rather than from a guess. Jen-Ken does include a furniture kit with this model, which is unusual in the line, and it is on the list above. Call or email us if you want the crate confirmed against your build before you order.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory warranty applies exactly as it would buying direct. Jen-Ken gives brick kilns two years. Keep your proof of purchase.
Annealing off a torch?
We are authorized Jen-Ken dealers based in Georgia. Tell us what you are making and what power you have available, and we will tell you straight whether this is the right kiln — including when a cheaper one would do.
Talk to an expert →



