Jen-Ken AF 2829 3" Ceramic Kiln
$5,089.00Regular price$5,635.00
Save $546.00- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time 6 to 8 weeks, confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

Jen-Ken AF 2829 3" Cerami...
$5,089.00
Overview
Jen-Ken · Ceramic Kiln · 3-Inch Brick
Jen-Ken AF 2829 3" Ceramic Kiln
Ten and a third cubic feet of 3-inch brick chamber — Jen-Ken's large studio kiln, and the standard-element sibling of the Mega Coil 2829. It fires to cone 8 at 2,300°F, which covers everything from bisque to mid-fire stoneware and porcelain. Jen-Ken offers it in two builds: 45 amps on a 6-50R plug, or a 55-amp high-fire build that is direct wired. Both are single phase. This is a kiln you put in a studio, not a spare room.
Max Temp2,300°F (Cone 8)
Chamber28" x 29"
Capacity10.33 cu ft
Power240V · 45A or 55A
What’s included
The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
The controller you orderJen-Ken fits the controller you pick when the order goes in — the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
Cord and plug, or direct wireThe 45-amp build ships with a cord and a NEMA 6-50P plug. The 55-amp build is direct-wired instead, with no plug, so an electrician lands the cable for you. Tell us which build you want before the order goes in.
Lid liftersJen-Ken lists lid lifters with this model.
Instruction manualJen-Ken's printed manual, including firing schedules and their electrical requirements.
2-year limited warrantyTwo years, direct from the Jen-Ken factory to the original purchaser and honoured through us as the dealer. Keep your proof of purchase.
Not included — kiln furnitureNo shelves, posts or kiln wash in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages.
Not included — solid-state relaysThis model ships with mechanical relays. Solid-state relays are a priced upgrade on Jen-Ken’s sheet, so ask for them at order if you want them.
Key features
3-inch brick wallsThicker walls for heat retention on a large chamber, where reheating from cold is the expensive part.
Two electrical builds45A on a NEMA 6-50R, or 55A high fire direct wired. Specify when you order.
Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
Chamber size28" x 29" — 10.33 cu ft. That is the space you actually have to load.
Technical specifications
ModelAF 2829 3" Ceramic Kiln
Kiln functionCeramics, pottery
Chamber dimensions28" x 29"
Cubic feet10.33 cu ft
Maximum temperature2,300°F (1,260°C)
Cone ratingCone 8
Voltage240V
PhaseSingle phase
Amperage — 45A build45A
Wattage — 45A build10,800W
Receptacle — 45A buildNEMA 6-50R
Breaker — 45A build60A
Circuit wire gauge — 45A build#6
Amperage — 55A high-fire build55A
Wattage — 55A high-fire build13,200W
Receptacle — 55A high-fire buildDirect wire
Breaker — 55A high-fire build70A
Circuit wire gauge — 55A high-fire build#4
Element placementSide-fired
LoadingTop-loading, with lid lifters
ControllerOrton AutoFire 12-button
Kiln weight300 lbs
Estimated shipping weight440 lbs
Shipping dimensions54" x 45" x 64"
Shipping methodMotor freight
Warranty2-year limited (Jen-Ken)
Optional accessories
Kiln shelves and postsJen-Ken's own shelves and posts are sized to this chamber. We stock them alongside the kiln.
Kiln washShelf primer keeps glaze off your shelves. Worth adding to a first order.
Furniture kitA matched set of shelves and posts for this chamber, cheaper than buying the pieces individually.
208V or three-phase buildJen-Ken can build most ceramic models for 208V, and some for three phase, to order. Contact us for a quote — there is no published spec for those builds.
Common questions
Which electrical build should I order?The 45A build runs 240V single phase, 10,800W, on a NEMA 6-50R with a 60A breaker and #6 wire. The 55A high-fire build is direct wired, 13,200W, with a 70A breaker and #4 wire — that is the one Jen-Ken points production users toward. Decide before you order; it is built to order and the two are not interchangeable. Have a licensed electrician confirm the circuit against local code, and note Jen-Ken's own advice that runs over 30 feet from the breaker may need the next heavier gauge.
What can it fire?Cone 8 at 2,300°F. That is low-fire, mid-fire stoneware and porcelain — the great majority of studio work. It will not reach cone 10; no Jen-Ken pottery kiln does.
How is this different from the Mega Coil 2829 3"?Same chamber and same 3-inch brick, different elements. The Mega Coil version uses six oversized heavy-gauge coils that last longer under frequent firing and are easier to change, and it costs more. This one uses Jen-Ken's standard element stock. If you fire once or twice a month, this is the better value; if you fire most days, look at the Mega Coil.
Will it fit through my door?Jen-Ken crates it at 54" x 45" x 64" and it ships at around 400 lbs by motor freight. Measure your access route before delivery and plan for a liftgate or a dock.
How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
What actually comes in the crate?The section at the top of this page is that list, and it comes from Jen-Ken’s own dealer price sheet for this model rather than from a guess. Kiln furniture is the thing most people assume is in the crate and is not — Jen-Ken prices the shelves and posts as a separate kit. Call or email us if you want the crate confirmed against your build before you order.
Can I get it in 208V or three phase?Standard build is 240V single phase, and that is the only configuration Jen-Ken publishes a specification for. Jen-Ken will build most ceramic models for 208V, and some for three phase, to order. There is no published amperage, breaker or wire figure for a three-phase build, so contact us for a quote and we will get the numbers from the factory.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory two-year warranty applies exactly as it would buying direct. Keep your proof of purchase.
45A or 55A high fire?
We are authorized Jen-Ken dealers based in Georgia. Tell us what you fire and what your panel will take, and we will tell you which build to order — and whether the Mega Coil version is worth the difference for how you work.
Talk to an expert →
