Black Friday Kiln Sale ends in
09Days: 02Hrs: 55Min: 15Sec
$125 off $1,500+ $250 off $3,000+ $500 off $5,000+
Save up to $500No code needed · applied at checkout
Shop kilns

Jen-Ken 1815 Ceramic Kiln

Jen-KenElectric KilnSKU JENKEN-1815-C
$2,109.00Regular price$2,252.00
Save $143.00

  • 15-day returns
  • No sales tax outside Georgia
  • Made in USA
Configure your kiln Not sure? Call 470-264-3563
Furniture kit

1815 Ceram-a-Glass is the size our records hold for this kiln. Change it here if your chamber is a different size, or call us and we will check it with you.

  • Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

    Shipping is chosen at checkout: free curbside freight, or Freight + Liftgate Delivery for $139.

    Freight is free and curbside, without a liftgate: plan on a loading dock, a forklift or 2 or more helpers. Or choose Freight + Liftgate Delivery at checkout, $139.

    Jen-Ken 1815 Ceramic Kiln
    $2,109.00
    Call

    Overview

    Jen-Ken · Ceramic Kiln · AF3C Series Jen-Ken 1815 Ceramic Kiln Model 1815 · 240V · 18" x 15" chamber · Cone 8 / 2,300°F The 1815 is a small kiln that fires like a big one. Eighteen inches across and fifteen deep gives 1.8 cubic feet — enough for a real firing of mugs and bowls rather than test pieces — and Jen-Ken rates it to cone 8 at 2,300°F, which is the same ceiling as kilns three times its size. It draws only 20 amps, so it goes on a 30-amp circuit, and at 100 pounds it is light enough to move with a friend. A sensible first kiln for a home studio with limited power.
    Max Temp2,300°F (Cone 8)
    Chamber18" x 15"
    Capacity1.8 cu ft
    Power240V · 20A
    What’s included
    The kiln, built and wiredCase, elements, thermocouple, switch box and wiring are all fitted and tested at the factory. It ships crated on a pallet by motor freight.
    The controller you orderJen-Ken fits the controller you pick when the order goes in — the AF3C 3-button, the AutoFire 12-button, the AutoFire Slide touchscreen or the TAP touchscreen. Each one is a different price, so the controller that ships is the one on your order rather than a fixed model.
    Cord and plug — NEMA 6-30PJen-Ken wires the cord and plug at the factory. You supply the matching receptacle on its own circuit — the breaker size and wire gauge for this model are in the specifications below.
    Instruction manualJen-Ken's printed manual, including firing schedules and their electrical requirements.
    2-year limited warrantyJen-Ken's brick-kiln warranty, direct from the factory to the original purchaser.
    Not included — kiln furnitureNo shelves, posts or kiln wash in the crate. Jen-Ken prices a furniture kit for this model as a separate line, and we stock the pieces on our accessories pages. Solid-state relays are a paid upgrade rather than standard.
    Key features
    Cone 8 in a small kilnFull 2,300°F range — you are not giving up firing temperature to get a small chamber.
    Light enough to place100 lbs empty. It does not need a reinforced floor or a forklift.
    Built to order in Lakeland, FloridaJen-Ken builds each kiln to order in their own Lakeland shop rather than pulling it from distributor stock. Allow build time before it ships.
    Chamber size18" x 15" — 1.8 cu ft. That is the space you actually have to load.
    Technical specifications
    Model1815 Ceramic Kiln
    Kiln functionCeramics, pottery
    Chamber dimensions18" x 15"
    Cubic feet1.8 cu ft
    Maximum temperature2,300°F (1,260°C)
    Cone ratingCone 8
    Voltage240V
    Amperage20A
    Wattage4,800W
    PhaseSingle phase
    ReceptacleNEMA 6-30R
    Breaker (fuse) size30A
    Circuit wire gauge#10
    Element placementSide-fired
    LoadingTop-loading
    ControllerOrton AF3C digital 3-button
    Overall dimensions23" x 26" x 20"
    Kiln weight100 lbs
    Estimated shipping weight200 lbs
    Shipping dimensions42" x 46" x 42"
    Shipping methodMotor freight
    Warranty2-year limited (Jen-Ken)
    Warranty: Two-year limited warranty from Jen-Ken Kilns to the original purchaser on brick kilns, covering defects in materials and workmanship and limited to repair or replacement of defective items. Elements and thermocouples carry their own two-year coverage; thermocouples are not warranted against breakage. The Orton controller is covered by Orton's own warranty. Keep your proof of purchase. Peach State Pottery is an authorized Jen-Ken dealer.
    Optional accessories
    Kiln shelves and postsJen-Ken's own shelves and posts are sized to this chamber. We stock them alongside the kiln.
    Kiln washShelf primer keeps glaze off your shelves. Worth adding to a first order.
    Furniture kitA matched set of shelves and posts for this chamber, cheaper than buying the pieces individually.
    208V or three-phase buildJen-Ken can build most ceramic models for 208V, and some for three phase, to order. Contact us for a quote — there is no published spec for those builds.
    Common questions
    What electrical circuit does it need?240V single phase, 20A draw, 4,800W, on a NEMA 6-30R receptacle with a 30A breaker and #10 circuit wire. That is dryer-class power and the lightest circuit in Jen-Ken's 240V ceramic range — but the kiln still needs its own dedicated run. Have a licensed electrician confirm against your local code, and note Jen-Ken's advice that runs over 30 feet from the breaker may need the next heavier gauge.
    What can it fire?Cone 8 at 2,300°F — mid-fire stoneware, porcelain, low-fire work, commercial glazes. The full studio range short of cone 10. The limit on this kiln is how much you can fit in it, not how hot it gets.
    Is 1.8 cubic feet a real kiln or a test kiln?A real one, just a small one. You will fit a sensible load of mugs, bowls and small sculpture and fire it properly. What you will not do is fire a month of production or a large platter. If you throw big, start at the 1822.
    Why choose this over the 15/13 'Emerge'?More chamber — 1.8 cubic feet against 1.4 — and a lower 20-amp draw. The Emerge is also rated for glass, which this one is not. If you only fire clay and you want the extra room, this is the one.
    How long until it ships?Jen-Ken builds to order in Lakeland, Florida. Their own guidance is that kilns can take several weeks to months depending on the production queue. Call us and we will get you the current estimate before you commit.
    What actually comes in the crate?The section at the top of this page is that list, and it comes from Jen-Ken’s own dealer price sheet for this model rather than from a guess. Kiln furniture is the thing most people assume is in the crate and is not — Jen-Ken prices the shelves and posts as a separate kit. Call or email us if you want the crate confirmed against your build before you order.
    Does buying from Peach State Pottery affect my warranty?No. We are an authorized Jen-Ken dealer, so the factory two-year warranty applies exactly as it would buying direct. Keep your proof of purchase.
    First kiln? Talk to us before you buy. We are authorized Jen-Ken dealers based in Georgia. Tell us what you make, where the kiln is going and what power you have, and we will tell you straight whether this is the right size — including when you should spend more, or less.
    Talk to an expert →