Cress ET911 Electric Ceramic Kiln
$1,399.35Regular price$1,473.00
Save $73.65- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time is confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
Cress ET911 Electric Cera...
$1,399.35
Overview
Cress · Electric Ceramic Kiln · ET-Series (3" brick)
Cress ET911 Electric Ceramic Kiln
The Cress ET911 is a compact 120V ceramic kiln that plugs into a standard 15-amp household outlet with its NEMA 5-15P plug, so no electrician or 240V circuit is needed. Its 11" hexagon chamber is 9" deep (0.55 cu ft), walled in 3" firebrick, and fires to Cone 6 (2250°F), which covers bisque, low-fire and mid-range glazes, china paint, decals and small sculpture. Built by Cress in Carson City, Nevada.
Max TempCone 6 (2250°F)
Chamber11" hexagon x 9"
Voltage120V
Insulation3" firebrick
What’s included
Heat-reflective metal stand
Cress supplies the stand and its mounting screws, and the manual is explicit that the kiln must be fired on it. Current E and ET kilns ship with Cress's heat-reflective stand, which cuts the floor temperature under the kiln.
Cress Electronic Control, installed
The digital control board is fitted and wired at the factory — five preset firing speeds plus full custom programming. This is a programmed kiln, not a kiln sitter.
Type K thermocouple
Installed at the factory and already calibrated to the control.
Two-position lid prop
For venting the early part of a firing. Cress supplies a prop, not a spring-assisted lifter — no Cress kiln has an assisted lid lift, whatever you may read elsewhere.
Firebrick peephole plugs
Tapered plugs for the peepholes. Cress does not publish how many ship with each model, so we do not quote a number.
Factory cord with a NEMA 5-15R plug
The 911 runs on a standard 115V household outlet — the only Cress model where the supplied plug type is published.
Three-year Cress warranty
Three years from the date of purchase to the original buyer. Cress handles warranty work through the dealer you bought from — so you call us, not a factory line.
Not included
Shelves, posts and kiln wash are separate; Cress builds a furniture kit per model. The Clean Air Vent System is an option and does not fit every kiln.
Key features
Built in Carson City, NevadaCress Manufacturing has designed and built its kilns in Carson City, Nevada since 1973.
3" Firebrick WallsET models use 3" brick that holds heat better than the 2.5" brick of E models, without shrinking the interior.
Electronic ControlCress 3-key touchpad controller with ConeFire and Ramp-Hold modes, automatic-adjusting PID, delay start, alarms and error codes. Ramp-Hold stores 4 programs of 8 segments each.
Plugs Into a Household Outlet120V, 15A with a NEMA 5-15P plug. No 240V circuit, no electrician, and it fits on a sturdy bench or its stand.
Electronic Limit TimerAn electronic limit timer backs up the controller as a safety shut-off.
Delay Start and AlarmsSet a delayed start, get alarms and readable error codes, and switch the display between °F and °C.
Technical specifications
ModelET911
SKUCRESS-ET911
Chamber opening11" hexagon
Chamber depth9"
Cubic feet0.55 cu ft
Maximum temperature2250°F (1232°C) / Cone 6
Voltage120V
Amperage15A
Kilowatts1.7 kW
Plug / connectionNEMA 5-15P (standard household plug)
Breaker (fuse) size20A (per Cress)
Insulation3" firebrick
Exterior dimensions17" W x 20.5" D x 24" H
ControllerCress 3-key touchpad controller with ConeFire and Ramp-Hold modes, automatic-adjusting PID, delay start, alarms and error codes.
Estimated shipping weight100 lbs
Warranty3-year limited (Cress Mfg.)
Optional accessories
FKHEXAJR furniture kitOne #10 full shelf, one #10 half shelf and 1/2" to 6" posts for Cress 11" hexagon kilns.
Cress Clean Air Vent SystemDraws fumes out of the kiln and vents them outside. It cannot be used with every kiln, so ask us to confirm fit.
Kiln washCoats shelves so glaze drips don't bond permanently.
Pyrometric conesWitness cones to verify heatwork in the load.
Factory options
Sectional ConstructionFactory option
Cress builds the kiln in stackable sections that are easier to move into basements and tight spaces, and it fires like a one-piece kiln once assembled.
- Stackable rings
- Easier to carry
- Order at time of purchase
- Adds $90 to Cress list price
Common questions
Can I plug this kiln into a regular wall outlet?Yes. The ET911 draws 15 amps at 120V and ships with a standard NEMA 5-15P plug. Cress recommends a 20-amp breaker, so use a circuit with nothing else running on it, and never use an extension cord.
How long until it ships?Cress kilns are built to order in Carson City, Nevada and ship directly from the factory. Lead time varies with Cress's production schedule, so call us for the current estimate before you order.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Cress dealer. Cress warrants its kilns for three years from the date of purchase to the original purchaser; keep your proof of purchase.
Not sure if the CRESS-ET911 is right for you?
We’re authorized Cress dealers based in Atlanta. Call, email, or chat — we’ll give you a straight answer about specs, sizing, wiring, and accessories before you spend a dollar.
Talk to an expert →