Cress E1414 Electric Ceramic Kiln
$1,867.70Regular price$1,966.00
Save $98.30- 15-day returns
- No sales tax outside Georgia
- Made in USA
Ways to save
Choose your build
Built to order.
Already built, not made to order, so there is nothing else to configure. We confirm the lead time in writing before you are charged.
Lead time is confirmed in writing before you are charged.
Configure your kiln
Not sure? Call 470-264-3563
-
Orton VentMaster Kiln Vent SystemFan assembly, Collection cup, High-temperature hose, Drill bit, Stud, Printed manual, Orton...

Cress E1414 Electric Cera...
$1,867.70
Overview
Cress · Electric Ceramic Kiln · E-Series
Cress E1414 Electric Ceramic Kiln
The Cress E1414 is a 14" heptagon top-loading electric kiln with a 13.5" deep, 1.4 cu ft chamber, rated to Cone 10 (2350°F) for stoneware and porcelain. It is part of Cress's E-Series, built in Carson City, Nevada with 2.5" firebrick walls, Cress's 5-speed electronic control and a heat-reflective stand that cuts floor temperature under the kiln. A solid pick for a first studio kiln or a teaching room.
Max TempCone 10 (2350°F)
Chamber14" heptagon x 13.5"
Voltage220V
Insulation2.5" firebrick
What’s included
Heat-reflective metal stand
Cress supplies the stand and its mounting screws, and the manual is explicit that the kiln must be fired on it. Current E and ET kilns ship with Cress's heat-reflective stand, which cuts the floor temperature under the kiln.
Cress Electronic Control, installed
The digital control board is fitted and wired at the factory — five preset firing speeds plus full custom programming. This is a programmed kiln, not a kiln sitter.
Type K thermocouple
Installed at the factory and already calibrated to the control.
Two-position lid prop
For venting the early part of a firing. Cress supplies a prop, not a spring-assisted lifter — no Cress kiln has an assisted lid lift, whatever you may read elsewhere.
Firebrick peephole plugs
Tapered plugs for the peepholes. Cress does not publish how many ship with each model, so we do not quote a number.
Factory power cord and plug
On cord-equipped configurations. Some Cress kilns are built wired-direct with no cord at all. Tell us your service and we will confirm which one you are getting before the order goes in.
Three-year Cress warranty
Three years from the date of purchase to the original buyer. Cress handles warranty work through the dealer you bought from — so you call us, not a factory line.
Not included
Shelves, posts and kiln wash are separate; Cress builds a furniture kit per model. The Clean Air Vent System is an option and does not fit every kiln.
Key features
Built in Carson City, NevadaCress Manufacturing has designed and built its kilns in Carson City, Nevada since 1973.
2.5" Firebrick WallsStandard 2.5" insulating firebrick. The same kiln is available as an ET model with 3" brick and a full-size interior.
Electronic ControlCress E-Series electronic control with 5 preset firing speeds (rather than the usual 3) plus custom programming. The control is 3-zone capable but wired for one zone from the factory, so it runs on a single thermocouple for lower maintenance; 3-zone control can be ordered at extra cost.
Heat-Reflective StandCress was the first to include heat-reflective stands, which greatly reduce floor temperature under the kiln while it fires.
Electronic Limit TimerAn electronic limit timer backs up the controller as a safety shut-off.
Sectional Option AvailableOrder it sectional and the kiln comes in stackable rings that are easier to carry down stairs and through tight doors.
Technical specifications
ModelE1414
SKUCRESS-E1414
Chamber opening14" heptagon
Chamber depth13.5"
Cubic feet1.4 cu ft
Maximum temperature2350°F (1288°C) / Cone 10
Voltage220V
Amperage22A
Kilowatts4.84 kW
Plug / connectionNEMA 6-30P
Breaker (fuse) size25A (per Cress)
Insulation2.5" firebrick
Exterior dimensions21" W x 25.5" D x 32" H
ControllerCress E-Series electronic control with 5 preset firing speeds (rather than the usual 3) plus custom programming.
Estimated shipping weight100 lbs
Warranty3-year limited (Cress Mfg.)
Optional accessories
FKHEPTA furniture kitTwo #7 full shelves, one #7 half shelf and assorted 1/2" to 6" posts, sized for Cress 14" heptagon kilns.
Cress Clean Air Vent SystemDraws fumes out of the kiln and vents them outside. It cannot be used with every kiln, so ask us to confirm fit.
Kiln washCoats shelves so glaze drips don't bond permanently.
Pyrometric conesWitness cones to verify heatwork in the load.
Factory options
3-Zone Temperature ControlFactory option
The controller is 3-zone capable. Ordered with 3-zone control, the kiln gets three thermocouples for top, middle and bottom balancing.
- Order at time of purchase
- Three thermocouples
- Better top-to-bottom uniformity
- Extra cost
ET1414 3" Brick VersionUpgrade
The same kiln with 3" brick and a full-size interior, for better heat retention and slower cooling.
- 3" insulating firebrick
- Interior not reduced
- Slower, gentler cooling
- Lower heat loss
Sectional ConstructionFactory option
Cress builds the kiln in stackable sections that are easier to move into basements and tight spaces, and it fires like a one-piece kiln once assembled.
- Stackable rings
- Easier to carry
- Order at time of purchase
- Adds $90 to Cress list price
Common questions
What electrical circuit does it need?The E1414 runs on 220V and draws 22A. Connection: NEMA 6-30P. Cress lists the breaker (fuse) size as 25A. A kiln is a continuous load, so have a licensed electrician size the breaker and wire to your local code before delivery.
What is the difference between Cress E and ET kilns?Brick thickness. E models use 2.5" firebrick; ET models use 3" brick. Cress builds the ET interior full size, so the chamber doesn't shrink; the extra brick holds heat better and cools more slowly, which helps glazes and reduces energy use.
How long until it ships?Cress kilns are built to order in Carson City, Nevada and ship directly from the factory. Lead time varies with Cress's production schedule, so call us for the current estimate before you order.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Cress dealer. Cress warrants its kilns for three years from the date of purchase to the original purchaser; keep your proof of purchase.
Not sure if the CRESS-E1414 is right for you?
We’re authorized Cress dealers based in Atlanta. Call, email, or chat — we’ll give you a straight answer about specs, sizing, wiring, and accessories before you spend a dollar.
Talk to an expert →
