Olympic Kilns FL17E Car Large Capacity Kiln
$11,259.00
✎ Made to Order
Built for You — Lead Times Up to 12 Weeks
This kiln is made to order and may take up to 12 weeks to ship. Lead times vary — we recommend confirming availability before purchase. Contact us to confirm your lead time →
⚡ State Requirement
Solid State Relay Required in Select States
Large Capacity Kilns shipping to CA, IL, CT, MN, ME, MA, NH, NY, RI, and VT must be equipped with a solid state relay. If not selected at checkout, pricing will be applied at the time of order. For all other locations, a solid state relay is a recommended but optional upgrade.
No Sales Tax Outside GA
Military Discount Available for Veterans
Made in the USA
Talk to a Specialist: (470) 264-3563
Get a Free Shipping Quote
Large capacity kilns require a custom freight quote based on your location and delivery requirements. Fill out the form below and we'll get back to you promptly.
Olympic Kilns · Electric Kiln · Large Capacity Car Kiln
Olympic Kilns FL17E Car Large Capacity Kiln
The FL17E Car is a front-loading production kiln with a rolling cart system that brings the entire 17 cubic foot chamber out to you on steel rails, making it dramatically easier to load heavy sculptures, large platters, or dense production runs. Built for studios, schools, and small production potteries that fire cone 10 regularly and need dependable high-fire capacity without the back strain of reaching deep into a stationary chamber. The car system transforms loading from a wrestling match into a straightforward workflow.
Max TempCone 10 / 2350°F
Chamber17 Cu. Ft.
Voltage240V or 208V
Loading StyleFront-loading car on rails
What’s included
Bartlett V6-CF / RTC-1000 digital controller12-key digital controller with multiple ramp-hold programs, delay start, preheat, cone offset, and skip step features for precise control over complex firing schedules. Includes cone table reference and real-time segment tracking during firings.
Welded heavy angle iron frameIndustrial-grade welded steel frame provides structural stability for daily production use and supports the weight of the rolling car system and fully loaded chamber over years of firing cycles.
Stainless steel jacketCorrosion-resistant stainless exterior withstands the humidity and temperature swings of studio environments while maintaining a professional appearance through thousands of firings.
Pilot lightExternal indicator light shows at a glance when the kiln is powered and firing, improving studio safety and allowing you to monitor kiln status from across the room.
Dedicated breaker boxIntegrated breaker panel provides easy access for maintenance, emergency shutoff capability, and lockout/tagout safety compliance for educational and shared studio environments.
Steel rail track and loading carHeavy-duty 6-foot steel track system with rolling cart allows the entire kiln chamber to roll out for loading, eliminating the need to reach deep into the kiln and making it easy to load heavy sculptural work or tightly packed production shelves safely and ergonomically.
Technical specifications
ModelFL17ECAR
Inside dimensions28" W x 28" D x 38" H
Cubic feet17 cu. ft.
Maximum temperatureCone 10 — 2350°F / 1288°C
Voltage240V or 208V, single phase
Amperage48 amps (typical for this size)
Controller (standard)Bartlett 12-key digital V6-CF or RTC-1000
Loading styleFront-loading with rolling car/cart on steel rail track
Estimated shipping weight1800 lbs
Optional accessories
Solid state relayIncredibly tight temperature control, longer element life, lower energy bills, and no moving parts to wear out. Highly recommended for production use.
Furniture kit4 layers of shelving, assorted posts, and a 5 lb bag of kiln wash sized for this kiln’s chamber. Order with the kiln to avoid separate shipping charges.
Genesis touchscreen controllerUpgrade from the standard V6-CF to Bartlett’s touchscreen interface with expanded program storage for complex production schedules.
Type S thermocouplePlatinum thermocouple for greater accuracy and longer lifespan than standard Type K. Recommended for high-fire production work.
Vent systemDowndraft venting improves air quality, extends element life, and produces more even temperatures. Strongly recommended for indoor installations.
480V optionFor facilities running 480V three-phase service, this kiln can be configured to match your existing electrical infrastructure.
Common questions
Do I need an electrician to install this kiln?Yes. A kiln this size requires a dedicated 240V or 208V circuit with appropriate amperage (typically 48-50 amps) and must be hardwired by a licensed electrician according to local electrical codes. The included breaker box simplifies the connection, but professional installation is required for safety and warranty compliance.
How many shelves can I fit in the 17 cubic foot chamber?The optional furniture kit includes 4 layers of shelving with posts, which is a practical starting point for most work. The 38" interior height gives you flexibility to adjust shelf spacing for tall pieces or pack more shelves for production runs of smaller work.
How does the car loading system work?The kiln chamber sits on a rolling cart that moves along a 6-foot steel rail track. You simply roll the entire chamber out from the stationary shell, load your shelves at a comfortable working height without reaching or bending into a deep cavity, then roll it back in and close the door. It's especially valuable when loading heavy sculptural work or dense production loads.
Should I add a solid state relay?For a production kiln at this price point firing regularly, absolutely. The solid state relay provides tighter temperature control for consistent results, reduces wear on elements so they last longer, lowers your power consumption, and eliminates the mechanical relay components that eventually wear out and need replacement. It pays for itself over the life of the kiln.
Does buying from Peach State Pottery affect my warranty?No. We are an authorized Olympic Kilns dealer. Your one-year warranty is fully valid and you have direct access to Olympic’s factory support team. Buying from an unauthorized seller or the used market can void your warranty entirely.
Not sure if the FL17ECAR is right for your production needs?
We’re authorized Olympic Kilns dealers based in Atlanta. Call, email, or chat — we’ll give you a straight answer about electrical requirements, sizing, and accessories before you spend a dollar.
Talk to an expert →