NO TIME TO CALL? SEND US A TEXT INSTEAD! | PRICE MATCH GUARANTEE | NO SALES TAX OUTSIDE GA* | MILITARY/VETERAN DISCOUNTS AVAILABLE
NO TIME TO CALL? SEND US A TEXT INSTEAD! | PRICE MATCH GUARANTEE | NO SALES TAX OUTSIDE GA* | MILITARY/VETERAN DISCOUNTS AVAILABLE
About Us Contact Us Shipping Returns Terms of Service
Skip to content
Olympic Kilns 1823E Electric Raku Kiln

Olympic Kilns 1823E Electric Raku Kiln

by Olympic Kilns
Save $264.00
$3,745.00
$3,481.00
🚚
Free Freight Delivery Included
✓ No sales tax outside GA ✓ Liftgate included free ✓ Authorized dealer
🔨
Made to Order: Kilns are built after ordering to your exact specifications. Current estimate is 8–12 weeks.
⚡
Need it sooner? Quick-Ship models ship in 2–3 weeks
View Quick-Ship
Questions? Call or text us at (470) 264-3563

Notify me when back in stock

★
Best for
Serious hobbyists, home studio potters, and small production studios who need a reliable, high-fire American-made kiln with full manufacturer support and room to grow.
🔨 Lead time
8–12 weeks
Made to order — built to your exact voltage and controller selections after ordering.
✓ Warranty
Manufacturer warranty
Full manufacturer coverage included. We are here if anything goes wrong.
✓ Why buy from Peach State Pottery?
★ Authorized Olympic Kilns Dealer
★ No sales tax outside Georgia
★ Free shipping included
★ Real support before & after order
★ Military discount for veterans
★ We are here if anything goes wrong
Call or text us:✆ (470) 264-3563
⏱
Production batches fill quickly
Olympic kilns are made to order. Placing your order now secures your spot in the current production batch and locks in today's pricing. Lead times can extend during busy periods.
Have questions before you order?
Call or text us at (470) 264-3563 — we will help confirm the right setup for your studio.
✆ Call or text us ✉ Save 3% with wire transfer
Olympic Kilns · Gas Kiln · Raku Olympic 1823E Electric Raku Kiln Model 1823E · 240V or 208V · 17.5″ W × 22.5″ D · 3.29 cubic feet · Cone 8 / 2300°F The Olympic 1823E is a specialized electric raku kiln that combines the convenience of electric firing with the rapid heating and cooling cycles required for raku pottery. With a 17.5″ × 22.5″ chamber and 2300°F maximum firing temperature, this kiln delivers the fast heat-up times necessary for traditional raku techniques while maintaining precise electric control.
Maximum temperatureCone 8 / 2300°F
Firing chamber17.5″ W × 22.5″ D
3.29 cubic feet
Power requirement240V or 208V
single-phase
Kiln typeElectric raku
specialized design
What’s included
KilnStar digital controller 8-segment programmable controller with ramp-and-hold capability for precise firing schedules
3-inch firebrick insulation Premium K23 soft firebrick construction for efficient heat retention and energy savings
Stainless steel jacket Durable exterior casing protects internal components and provides years of reliable service
Balanced element design High-quality Kanthal A-1 heating elements arranged for uniform heat distribution throughout the chamber
Metal stand with casters Heavy-duty rolling stand allows easy positioning and workspace flexibility
Pilot light indicator External power indicator light shows at-a-glance when kiln is energized
Technical specifications
Model number1823E
Internal dimensions17.5″ diameter × 22.5″ depth
Internal capacity3.29 cubic feet
Brick thickness3 inches (K23 soft firebrick)
Maximum temperatureCone 8 / 2300°F
Voltage options240V single-phase or 208V single-phase
Amperage (240V)30 amps
Wattage (240V)7200 watts
Recommended breaker40 amp dedicated circuit
Plug configurationNEMA 6-50 or hardwired
Wire gauge required8 AWG copper (consult electrician)
Element typeKanthal A-1 coil elements
ControllerKilnStar 8-segment programmable
Shipping weightApproximately 375 lbs
Warranty: One-year limited kiln warranty from Olympic Kilns. Must be registered within 30 days of delivery. Valid only through authorized dealers.
Optional accessories
Solid-state relay (SSR) upgrade Silent operation with longer element life and more precise temperature control compared to mechanical contactors
Furniture kit Custom-sized kiln shelves and posts designed to fit the 1823E chamber dimensions for efficient stacking
Orton AutoVent Automatic downdraft ventilation system removes fumes and maintains studio air quality during firing cycles
Lid lift system Spring-assisted mechanism reduces lid weight by 90% for easier loading and unloading of hot work
Power interrupt module Automatically shuts down kiln in the event of power loss and prevents restart until manually reset
Type S thermocouple replacement Spare high-temperature thermocouple probe for accurate temperature sensing and extended service life
Emergency parts kit Assortment of critical replacement parts including thermocouple, relay, and fuses to minimize downtime
Raku tongs and tools Professional-grade long-handled tongs and safety equipment designed for hot ceramic extraction during raku firing
Controller upgrade
Genesis Touchscreen — Bartlett InstrumentsRecommended
Upgrade from the KilnStar controller to the Genesis touchscreen for enhanced programming capability and intuitive operation. The full-color interface provides real-time kiln status, firing curve visualization, and advanced scheduling features ideal for raku firing profiles that require rapid temperature changes.
  • 4.3-inch full-color touchscreen with icon-based navigation
  • Store up to 100 custom firing programs with unlimited segments per program
  • Real-time firing graph displays temperature curve as the kiln fires
  • Delay start scheduling allows unattended firing initiation up to 7 days in advance
  • Data logging records firing history for quality control and troubleshooting
  • User-adjustable alarms and safety features including thermocouple failure detection
Common questions
What electrical work is required to install the 1823E?
The 1823E requires a dedicated 40-amp, 240V single-phase circuit with 8 AWG copper wiring. Most installations require a licensed electrician to run new wiring from your electrical panel to the kiln location. The kiln can be ordered with a NEMA 6-50 plug or configured for hardwired installation. If you have 208V service instead of 240V (common in commercial buildings), specify this when ordering as element configuration may differ.
Does the 1823E come with kiln furniture?
No, kiln shelves and posts are sold separately. We recommend ordering a furniture kit sized specifically for the 17.5″ diameter chamber when you purchase the kiln. Raku firing typically requires minimal shelving since work is often loaded individually, but having appropriate half-rounds or full shelves allows you to fire multiple pieces efficiently.
How is this electric raku kiln different from a standard ceramic kiln?
The 1823E is engineered specifically for raku with faster heating elements and a chamber design that allows rapid temperature changes. The door configuration and chamber depth facilitate quick removal of hot work—essential for raku technique. While it can fire to Cone 8 (2300°F), its construction prioritizes the thermal shock resistance and rapid cycling needed for raku rather than the slow, controlled bisque and glaze firings of standard pottery kilns.
What maintenance does the 1823E require?
Regularly inspect elements for breaks or sagging and vacuum debris from the chamber floor after every few firings. The thermocouple should be checked annually and replaced when readings become inconsistent. Raku kilns experience more thermal stress than standard kilns due to rapid cycling, so expect element replacement every 100-150 firings depending on usage. Keep door seals clean and replace if gaps develop. The KilnStar controller is maintenance-free but should be kept clean and dry.
How do I register my warranty?
Olympic Kilns requires warranty registration within 30 days of delivery. You'll receive registration instructions with your kiln, or you can register directly on the Olympic Kilns website using your serial number and purchase date. Warranty coverage is valid only for kilns purchased through authorized dealers like Peach State Pottery. Keep your sales receipt as proof of purchase date.
Not sure if the 1823E is the right kiln for your space? Our team can help you evaluate electrical requirements, compare raku kiln options, and coordinate delivery to your Atlanta-area studio.
Talk to an expert →
Description
Olympic Kilns · Gas Kiln · Raku Olympic 1823E Electric Raku Kiln Model 1823E · 240V or 208V · 17.5″ W × 22.5″ D · 3.29 cubic feet · Cone 8 / 2300°F The Olympic 1823E is a specialized electric raku kiln that combines the convenience of electric firing with the rapid heating and cooling cycles required for raku pottery. With a 17.5″ × 22.5″ chamber and 2300°F maximum firing temperature, this kiln delivers the fast heat-up times necessary for traditional raku techniques while maintaining precise electric control. Maximum temperatureCone 8 / 2300°F Firing chamber17.5″ W × 22.5″ D
3.29 cubic feet Power requirement240V or 208V
single-phase Kiln typeElectric raku
specialized design What’s included KilnStar digital controller 8-segment programmable controller with ramp-and-hold capability for precise firing schedules 3-inch firebrick insulation Premium K23 soft firebrick construction for efficient heat retention and energy savings Stainless steel jacket Durable exterior casing protects internal components and provides years of reliable service Balanced element design High-quality Kanthal A-1 heating elements arranged for uniform heat distribution throughout the chamber Metal stand with casters Heavy-duty rolling stand allows easy positioning and workspace flexibility Pilot light indicator External power indicator light shows at-a-glance when kiln is energized Technical specifications Model number1823E Internal dimensions17.5″ diameter × 22.5″ depth Internal capacity3.29 cubic feet Brick thickness3 inches (K23 soft firebrick) Maximum temperatureCone 8 / 2300°F Voltage options240V single-phase or 208V single-phase Amperage (240V)30 amps Wattage (240V)7200 watts Recommended breaker40 amp dedicated circuit Plug configurationNEMA 6-50 or hardwired Wire gauge required8 AWG copper (consult electrician) Element typeKanthal A-1 coil elements ControllerKilnStar 8-segment programmable Shipping weightApproximately 375 lbs Warranty: One-year limited kiln warranty from Olympic Kilns. Must be registered within 30 days of delivery. Valid only through authorized dealers. Optional accessories Solid-state relay (SSR) upgrade Silent operation with longer element life and more precise temperature control compared to mechanical contactors Furniture kit Custom-sized kiln shelves and posts designed to fit the 1823E chamber dimensions for efficient stacking Orton AutoVent Automatic downdraft ventilation system removes fumes and maintains studio air quality during firing cycles Lid lift system Spring-assisted mechanism reduces lid weight by 90% for easier loading and unloading of hot work Power interrupt module Automatically shuts down kiln in the event of power loss and prevents restart until manually reset Type S thermocouple replacement Spare high-temperature thermocouple probe for accurate temperature sensing and extended service life Emergency parts kit Assortment of critical replacement parts including thermocouple, relay, and fuses to minimize downtime Raku tongs and tools Professional-grade long-handled tongs and safety equipment designed for hot ceramic extraction during raku firing Controller upgrade Genesis Touchscreen — Bartlett InstrumentsRecommended Upgrade from the KilnStar controller to the Genesis touchscreen for enhanced programming capability and intuitive operation. The full-color interface provides real-time kiln status, firing curve visualization, and advanced scheduling features ideal for raku firing profiles that require rapid temperature changes.
  • 4.3-inch full-color touchscreen with icon-based navigation
  • Store up to 100 custom firing programs with unlimited segments per program
  • Real-time firing graph displays temperature curve as the kiln fires
  • Delay start scheduling allows unattended firing initiation up to 7 days in advance
  • Data logging records firing history for quality control and troubleshooting
  • User-adjustable alarms and safety features including thermocouple failure detection
 Common questions What electrical work is required to install the 1823E? The 1823E requires a dedicated 40-amp, 240V single-phase circuit with 8 AWG copper wiring. Most installations require a licensed electrician to run new wiring from your electrical panel to the kiln location. The kiln can be ordered with a NEMA 6-50 plug or configured for hardwired installation. If you have 208V service instead of 240V (common in commercial buildings), specify this when ordering as element configuration may differ. Does the 1823E come with kiln furniture? No, kiln shelves and posts are sold separately. We recommend ordering a furniture kit sized specifically for the 17.5″ diameter chamber when you purchase the kiln. Raku firing typically requires minimal shelving since work is often loaded individually, but having appropriate half-rounds or full shelves allows you to fire multiple pieces efficiently. How is this electric raku kiln different from a standard ceramic kiln? The 1823E is engineered specifically for raku with faster heating elements and a chamber design that allows rapid temperature changes. The door configuration and chamber depth facilitate quick removal of hot work—essential for raku technique. While it can fire to Cone 8 (2300°F), its construction prioritizes the thermal shock resistance and rapid cycling needed for raku rather than the slow, controlled bisque and glaze firings of standard pottery kilns. What maintenance does the 1823E require? Regularly inspect elements for breaks or sagging and vacuum debris from the chamber floor after every few firings. The thermocouple should be checked annually and replaced when readings become inconsistent. Raku kilns experience more thermal stress than standard kilns due to rapid cycling, so expect element replacement every 100-150 firings depending on usage. Keep door seals clean and replace if gaps develop. The KilnStar controller is maintenance-free but should be kept clean and dry. How do I register my warranty? Olympic Kilns requires warranty registration within 30 days of delivery. You'll receive registration instructions with your kiln, or you can register directly on the Olympic Kilns website using your serial number and purchase date. Warranty coverage is valid only for kilns purchased through authorized dealers like Peach State Pottery. Keep your sales receipt as proof of purchase date. Not sure if the 1823E is the right kiln for your space? Our team can help you evaluate electrical requirements, compare raku kiln options, and coordinate delivery to your Atlanta-area studio. Talk to an expert →
Shipping/Returns

Shipping

  • Orders are FOB origin when they leave our loading dock. This means we hold the carrier's receipt that your order left in good condition.
  • The carrier is responsible for transporting your freight but not for unloading it.
  • Lift gate required if you do not have a loading dock. A lift gate service must be requested when ordering your kiln. Lift gates are available for kilns on 6 ft. x 6 ft. pallets or smaller.
  • Large Capacity kilns (20 cubic feet and larger) require the customer to have a forklift that can move the kiln from the truck to the desired location.
  • Customer is responsible for moving the freight from the truck to its place of use.
  • UPS and FedEx will deliver smaller shipments to your door.

Upon Delivery

  • You have the option of refusing delivery if the freight appears to be damaged.
  • Check the count of the items ordered, and note on the carrier's delivery receipt any shortages.
  • If any damage appears on outside of package, have the driver inspect the packages and note on the carrier's delivery receipt the damage.
  • Immediately after delivery, open all cartons to determine if there is any concealed damage.
  • Retain all damaged items with their packaging.
  • Report damage within 24 hours. If a call is made later than 36 hours, the carrier can deny your claim.
  • Confirm call in writing by registered mail and keep a copy for your records.

Upon Carrier Inspection

  • Make sure the damaged items have not been moved from the receiving area prior to discovery of the damage.
  • Allow the inspector to inspect damaged items, cartons, inner packing materials and freight bill.
  • Retain your delivery receipt – it will be required as supporting documentation when a claim is filed.
  • Once the inspector has filled out the inspection report, read it carefully and make sure you agree with the report.
  • Unless repairs will be completely satisfactory, be sure the inspector requests replacement on the inspection report.

After Carrier Inspection

  • Continue to retain damaged merchandise even though the inspection has been completed.
  • Damaged items cannot be used or disposed of without written permission from the carrier.
  • Do not return damaged items without written authorization from the supplier.
  • If damaged items are picked up by the carrier for salvage, secure the receipt.

Filing a Freight Claim

  • It is the customer's responsibility (as consignee) to file any claim.
  • We are willing to assist you in collecting claims but this willingness does not make us responsible for collection of claims or replacement of materials damaged or lost.
  • We cannot make freight claims for customers.
  • Documents required for filing a freight claim:
    • Carrier's loss or damage claim form
    • Shipper's original invoice or copy
    • Original bill of lading
    • Original paid freight bill
    • Carrier's inspection report
    • Repair invoice
  • We do not allow any deductions from invoices for damaged ware.

Returns

  • Custom orders, certified pre-owned, or used products are not eligible for return.
  • Products purchased for temporary use (e.g., trade shows) are not eligible for return.
  • Specific product exceptions will be noted in the product description.
  • Missing items: Contact us via email at sales@peachstatepottery.com as soon as you notice, and we will ship those items immediately.
  • No restocking fee is applied by Peach State Pottery (supplier fees may still apply).
  • Payment processing fees are non-refundable.

For assistance, contact us at: sales@peachstatepottery.com or call 470-264-3563.

Olympic Kilns is manufactured by Haugen Manufacturing, Inc. • P.O. Box 1347 • 4225 Thurmon Tanner Parkway • Flowery Branch, GA 30542

Why Buy From Us?

Why Shop with Peach State Pottery?

We’re passionate about helping potters succeed — from hobbyists to professionals. Here’s why makers choose us:

  • Expert Guidance — Our team helps you choose the right kiln for your space, power, and firing needs.
  • Transparent Pricing & Free Shipping — What you see is what you pay. Free standard shipping to the contiguous U.S. with no hidden fees.
  • Flexible Policies — Generous returns, including the manufacturer’s recommended first test firing.
  • Dedicated Support — Real people ready to assist with lead times, delivery, troubleshooting, and warranty questions.
  • Built to Last — We focus on quality equipment that supports your long-term pottery journey.

Warranty & Product Support

We stand behind every kiln and piece of equipment we sell. Most products include the manufacturer’s standard warranty covering defects in materials and workmanship.

If you receive a damaged or defective item, note it at delivery and email clear photos to sales@peachstatepottery.com the same day. We’ll handle replacement or repair at no cost to you and cover return shipping for approved claims.

Please retain all original packaging until the issue is resolved.

Manufacturer’s Recommended First Firing is allowed without affecting your return eligibility, as long as the kiln is returned in excellent, like-new condition with all original parts and packaging.

Have questions? Reach out anytime at sales@peachstatepottery.com.

Warranty

Olympic Kilns Warranty

Olympic Kilns are warranted by Olympic Kilns / Haugen Manufacturing, Inc. for kilns used for ceramics, pottery, and glass, subject to the warranty periods, requirements, and exclusions listed below.

This warranty is provided by Olympic Kilns / Haugen Manufacturing, Inc. Peach State Pottery is here to help customers understand warranty coverage and assist with the process if warranty service is needed.

Warranty Periods

Warranty coverage depends on the kiln type and configuration.

Product / Component Warranty Period
Kilns equipped with a Kiln Sitter and Safety Timer 1 year
Cone 10 kilns 1 year
All other Olympic kilns 2 years
Thermocouples Not covered
Kiln furniture Not covered

Warranty coverage must be activated by registering your purchase.

What the Warranty Covers

Olympic Kilns warranty coverage applies to defects in manufacturing for eligible kilns used for ceramics, pottery, and glass.

If a covered manufacturing defect is confirmed, Olympic Kilns may repair, replace, or refund the affected part or product as appropriate.

Warranty Registration Required

To activate warranty coverage, your Olympic Kilns purchase must be registered. Keep your proof of purchase, order information, and any product documentation for your records.

Reporting a Defect

Defects must be reported in writing within six (6) days of discovery. Your written notice should include:

  • The date the issue was discovered
  • The place of purchase
  • Proof of purchase
  • A description of the defect
  • Photos or videos, if available

Warranty Exclusions

The Olympic Kilns warranty does not cover damage or issues caused by:

  • Kilns damaged or altered after leaving the factory.
  • Damage caused by reduction firing or salt firing.
  • Over-firing or exceeding the maximum cone or temperature rating.
  • Improper installation.
  • Use of electrical voltages different from those specified for the kiln.
  • Firing materials other than ceramics and glass.
  • Thermocouples or kiln furniture.

Freight Damage Is Not Warranty Damage

Damage that occurs during shipping or delivery is not treated as a manufacturing warranty defect. Freight damage must be documented at delivery and handled through the freight claim process.

Please inspect your shipment carefully before signing for delivery. Take photos or video of the packaging before unpacking and continue documenting the unpacking process, especially if you notice any visible damage.

Warranty Claim Process

If you believe your Olympic kiln has a warranty-related issue, contact Peach State Pottery with your order information and a description of the issue. We will help review the situation and assist with the next steps.

If the issue is not resolved through the retailer, Olympic Kilns must be contacted in writing within six (6) days of the first indication of the defect.

Olympic Kilns will determine which parts appear to require repair and will provide instructions for shipment when needed.

Customer Responsibilities

For warranty service, the customer may be responsible for dismantling, packaging, and shipping only the parts requested by Olympic Kilns.

  • Requested parts must be packaged carefully and shipped freight prepaid.
  • The customer is responsible for dismantling and reinstalling parts.
  • The customer is responsible for packaging and shipping costs unless otherwise stated.
  • Only the parts requested by Olympic Kilns should be shipped.

If an entire kiln is returned for warranty repair, the customer is responsible for prepaying the cost of packaging and shipping both to and from the factory.

Repair, Replacement, or Refund

If Olympic Kilns determines that the issue is due to a manufacturing defect, Olympic Kilns will repair, replace, or refund as appropriate within thirty (30) days.

Repaired or replacement parts will be shipped back to the customer at Olympic Kilns’ cost using the customer’s package. The customer is responsible for reinstalling the parts.

Non-Warranty Repairs

If the parts sent to Olympic Kilns require repair or replacement for a reason not covered by the warranty, no work will be performed until the customer authorizes the work and makes payment arrangements.

Limits of Warranty Coverage

Olympic Kilns shall not be liable for injuries to persons or property, or for incidental, contingent, special, or consequential damages arising from the use of its products.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to every customer. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

Manufacturer Information

Olympic Kilns is manufactured by Haugen Manufacturing, Inc.

P.O. Box 1347
4225 Thurmon Tanner Parkway
Flowery Branch, GA 30542

Need Help?

If you have questions about your Olympic Kilns warranty, need help identifying your warranty coverage, or believe your kiln may need warranty service, please contact Peach State Pottery.

Email: sales@peachstatepottery.com
Phone: 470-264-3563

Description
Olympic Kilns · Gas Kiln · Raku Olympic 1823E Electric Raku Kiln Model 1823E · 240V or 208V · 17.5″ W × 22.5″ D · 3.29 cubic feet · Cone 8 / 2300°F The Olympic 1823E is a specialized electric raku kiln that combines the convenience of electric firing with the rapid heating and cooling cycles required for raku pottery. With a 17.5″ × 22.5″ chamber and 2300°F maximum firing temperature, this kiln delivers the fast heat-up times necessary for traditional raku techniques while maintaining precise electric control. Maximum temperatureCone 8 / 2300°F Firing chamber17.5″ W × 22.5″ D
3.29 cubic feet Power requirement240V or 208V
single-phase Kiln typeElectric raku
specialized design What’s included KilnStar digital controller 8-segment programmable controller with ramp-and-hold capability for precise firing schedules 3-inch firebrick insulation Premium K23 soft firebrick construction for efficient heat retention and energy savings Stainless steel jacket Durable exterior casing protects internal components and provides years of reliable service Balanced element design High-quality Kanthal A-1 heating elements arranged for uniform heat distribution throughout the chamber Metal stand with casters Heavy-duty rolling stand allows easy positioning and workspace flexibility Pilot light indicator External power indicator light shows at-a-glance when kiln is energized Technical specifications Model number1823E Internal dimensions17.5″ diameter × 22.5″ depth Internal capacity3.29 cubic feet Brick thickness3 inches (K23 soft firebrick) Maximum temperatureCone 8 / 2300°F Voltage options240V single-phase or 208V single-phase Amperage (240V)30 amps Wattage (240V)7200 watts Recommended breaker40 amp dedicated circuit Plug configurationNEMA 6-50 or hardwired Wire gauge required8 AWG copper (consult electrician) Element typeKanthal A-1 coil elements ControllerKilnStar 8-segment programmable Shipping weightApproximately 375 lbs Warranty: One-year limited kiln warranty from Olympic Kilns. Must be registered within 30 days of delivery. Valid only through authorized dealers. Optional accessories Solid-state relay (SSR) upgrade Silent operation with longer element life and more precise temperature control compared to mechanical contactors Furniture kit Custom-sized kiln shelves and posts designed to fit the 1823E chamber dimensions for efficient stacking Orton AutoVent Automatic downdraft ventilation system removes fumes and maintains studio air quality during firing cycles Lid lift system Spring-assisted mechanism reduces lid weight by 90% for easier loading and unloading of hot work Power interrupt module Automatically shuts down kiln in the event of power loss and prevents restart until manually reset Type S thermocouple replacement Spare high-temperature thermocouple probe for accurate temperature sensing and extended service life Emergency parts kit Assortment of critical replacement parts including thermocouple, relay, and fuses to minimize downtime Raku tongs and tools Professional-grade long-handled tongs and safety equipment designed for hot ceramic extraction during raku firing Controller upgrade Genesis Touchscreen — Bartlett InstrumentsRecommended Upgrade from the KilnStar controller to the Genesis touchscreen for enhanced programming capability and intuitive operation. The full-color interface provides real-time kiln status, firing curve visualization, and advanced scheduling features ideal for raku firing profiles that require rapid temperature changes.
  • 4.3-inch full-color touchscreen with icon-based navigation
  • Store up to 100 custom firing programs with unlimited segments per program
  • Real-time firing graph displays temperature curve as the kiln fires
  • Delay start scheduling allows unattended firing initiation up to 7 days in advance
  • Data logging records firing history for quality control and troubleshooting
  • User-adjustable alarms and safety features including thermocouple failure detection
 Common questions What electrical work is required to install the 1823E? The 1823E requires a dedicated 40-amp, 240V single-phase circuit with 8 AWG copper wiring. Most installations require a licensed electrician to run new wiring from your electrical panel to the kiln location. The kiln can be ordered with a NEMA 6-50 plug or configured for hardwired installation. If you have 208V service instead of 240V (common in commercial buildings), specify this when ordering as element configuration may differ. Does the 1823E come with kiln furniture? No, kiln shelves and posts are sold separately. We recommend ordering a furniture kit sized specifically for the 17.5″ diameter chamber when you purchase the kiln. Raku firing typically requires minimal shelving since work is often loaded individually, but having appropriate half-rounds or full shelves allows you to fire multiple pieces efficiently. How is this electric raku kiln different from a standard ceramic kiln? The 1823E is engineered specifically for raku with faster heating elements and a chamber design that allows rapid temperature changes. The door configuration and chamber depth facilitate quick removal of hot work—essential for raku technique. While it can fire to Cone 8 (2300°F), its construction prioritizes the thermal shock resistance and rapid cycling needed for raku rather than the slow, controlled bisque and glaze firings of standard pottery kilns. What maintenance does the 1823E require? Regularly inspect elements for breaks or sagging and vacuum debris from the chamber floor after every few firings. The thermocouple should be checked annually and replaced when readings become inconsistent. Raku kilns experience more thermal stress than standard kilns due to rapid cycling, so expect element replacement every 100-150 firings depending on usage. Keep door seals clean and replace if gaps develop. The KilnStar controller is maintenance-free but should be kept clean and dry. How do I register my warranty? Olympic Kilns requires warranty registration within 30 days of delivery. You'll receive registration instructions with your kiln, or you can register directly on the Olympic Kilns website using your serial number and purchase date. Warranty coverage is valid only for kilns purchased through authorized dealers like Peach State Pottery. Keep your sales receipt as proof of purchase date. Not sure if the 1823E is the right kiln for your space? Our team can help you evaluate electrical requirements, compare raku kiln options, and coordinate delivery to your Atlanta-area studio. Talk to an expert →
Shipping/Returns

Shipping

  • Orders are FOB origin when they leave our loading dock. This means we hold the carrier's receipt that your order left in good condition.
  • The carrier is responsible for transporting your freight but not for unloading it.
  • Lift gate required if you do not have a loading dock. A lift gate service must be requested when ordering your kiln. Lift gates are available for kilns on 6 ft. x 6 ft. pallets or smaller.
  • Large Capacity kilns (20 cubic feet and larger) require the customer to have a forklift that can move the kiln from the truck to the desired location.
  • Customer is responsible for moving the freight from the truck to its place of use.
  • UPS and FedEx will deliver smaller shipments to your door.

Upon Delivery

  • You have the option of refusing delivery if the freight appears to be damaged.
  • Check the count of the items ordered, and note on the carrier's delivery receipt any shortages.
  • If any damage appears on outside of package, have the driver inspect the packages and note on the carrier's delivery receipt the damage.
  • Immediately after delivery, open all cartons to determine if there is any concealed damage.
  • Retain all damaged items with their packaging.
  • Report damage within 24 hours. If a call is made later than 36 hours, the carrier can deny your claim.
  • Confirm call in writing by registered mail and keep a copy for your records.

Upon Carrier Inspection

  • Make sure the damaged items have not been moved from the receiving area prior to discovery of the damage.
  • Allow the inspector to inspect damaged items, cartons, inner packing materials and freight bill.
  • Retain your delivery receipt – it will be required as supporting documentation when a claim is filed.
  • Once the inspector has filled out the inspection report, read it carefully and make sure you agree with the report.
  • Unless repairs will be completely satisfactory, be sure the inspector requests replacement on the inspection report.

After Carrier Inspection

  • Continue to retain damaged merchandise even though the inspection has been completed.
  • Damaged items cannot be used or disposed of without written permission from the carrier.
  • Do not return damaged items without written authorization from the supplier.
  • If damaged items are picked up by the carrier for salvage, secure the receipt.

Filing a Freight Claim

  • It is the customer's responsibility (as consignee) to file any claim.
  • We are willing to assist you in collecting claims but this willingness does not make us responsible for collection of claims or replacement of materials damaged or lost.
  • We cannot make freight claims for customers.
  • Documents required for filing a freight claim:
    • Carrier's loss or damage claim form
    • Shipper's original invoice or copy
    • Original bill of lading
    • Original paid freight bill
    • Carrier's inspection report
    • Repair invoice
  • We do not allow any deductions from invoices for damaged ware.

Returns

  • Custom orders, certified pre-owned, or used products are not eligible for return.
  • Products purchased for temporary use (e.g., trade shows) are not eligible for return.
  • Specific product exceptions will be noted in the product description.
  • Missing items: Contact us via email at sales@peachstatepottery.com as soon as you notice, and we will ship those items immediately.
  • No restocking fee is applied by Peach State Pottery (supplier fees may still apply).
  • Payment processing fees are non-refundable.

For assistance, contact us at: sales@peachstatepottery.com or call 470-264-3563.

Olympic Kilns is manufactured by Haugen Manufacturing, Inc. • P.O. Box 1347 • 4225 Thurmon Tanner Parkway • Flowery Branch, GA 30542

Why Buy From Us?

Why Shop with Peach State Pottery?

We’re passionate about helping potters succeed — from hobbyists to professionals. Here’s why makers choose us:

  • Expert Guidance — Our team helps you choose the right kiln for your space, power, and firing needs.
  • Transparent Pricing & Free Shipping — What you see is what you pay. Free standard shipping to the contiguous U.S. with no hidden fees.
  • Flexible Policies — Generous returns, including the manufacturer’s recommended first test firing.
  • Dedicated Support — Real people ready to assist with lead times, delivery, troubleshooting, and warranty questions.
  • Built to Last — We focus on quality equipment that supports your long-term pottery journey.

Warranty & Product Support

We stand behind every kiln and piece of equipment we sell. Most products include the manufacturer’s standard warranty covering defects in materials and workmanship.

If you receive a damaged or defective item, note it at delivery and email clear photos to sales@peachstatepottery.com the same day. We’ll handle replacement or repair at no cost to you and cover return shipping for approved claims.

Please retain all original packaging until the issue is resolved.

Manufacturer’s Recommended First Firing is allowed without affecting your return eligibility, as long as the kiln is returned in excellent, like-new condition with all original parts and packaging.

Have questions? Reach out anytime at sales@peachstatepottery.com.

Warranty

Olympic Kilns Warranty

Olympic Kilns are warranted by Olympic Kilns / Haugen Manufacturing, Inc. for kilns used for ceramics, pottery, and glass, subject to the warranty periods, requirements, and exclusions listed below.

This warranty is provided by Olympic Kilns / Haugen Manufacturing, Inc. Peach State Pottery is here to help customers understand warranty coverage and assist with the process if warranty service is needed.

Warranty Periods

Warranty coverage depends on the kiln type and configuration.

Product / Component Warranty Period
Kilns equipped with a Kiln Sitter and Safety Timer 1 year
Cone 10 kilns 1 year
All other Olympic kilns 2 years
Thermocouples Not covered
Kiln furniture Not covered

Warranty coverage must be activated by registering your purchase.

What the Warranty Covers

Olympic Kilns warranty coverage applies to defects in manufacturing for eligible kilns used for ceramics, pottery, and glass.

If a covered manufacturing defect is confirmed, Olympic Kilns may repair, replace, or refund the affected part or product as appropriate.

Warranty Registration Required

To activate warranty coverage, your Olympic Kilns purchase must be registered. Keep your proof of purchase, order information, and any product documentation for your records.

Reporting a Defect

Defects must be reported in writing within six (6) days of discovery. Your written notice should include:

  • The date the issue was discovered
  • The place of purchase
  • Proof of purchase
  • A description of the defect
  • Photos or videos, if available

Warranty Exclusions

The Olympic Kilns warranty does not cover damage or issues caused by:

  • Kilns damaged or altered after leaving the factory.
  • Damage caused by reduction firing or salt firing.
  • Over-firing or exceeding the maximum cone or temperature rating.
  • Improper installation.
  • Use of electrical voltages different from those specified for the kiln.
  • Firing materials other than ceramics and glass.
  • Thermocouples or kiln furniture.

Freight Damage Is Not Warranty Damage

Damage that occurs during shipping or delivery is not treated as a manufacturing warranty defect. Freight damage must be documented at delivery and handled through the freight claim process.

Please inspect your shipment carefully before signing for delivery. Take photos or video of the packaging before unpacking and continue documenting the unpacking process, especially if you notice any visible damage.

Warranty Claim Process

If you believe your Olympic kiln has a warranty-related issue, contact Peach State Pottery with your order information and a description of the issue. We will help review the situation and assist with the next steps.

If the issue is not resolved through the retailer, Olympic Kilns must be contacted in writing within six (6) days of the first indication of the defect.

Olympic Kilns will determine which parts appear to require repair and will provide instructions for shipment when needed.

Customer Responsibilities

For warranty service, the customer may be responsible for dismantling, packaging, and shipping only the parts requested by Olympic Kilns.

  • Requested parts must be packaged carefully and shipped freight prepaid.
  • The customer is responsible for dismantling and reinstalling parts.
  • The customer is responsible for packaging and shipping costs unless otherwise stated.
  • Only the parts requested by Olympic Kilns should be shipped.

If an entire kiln is returned for warranty repair, the customer is responsible for prepaying the cost of packaging and shipping both to and from the factory.

Repair, Replacement, or Refund

If Olympic Kilns determines that the issue is due to a manufacturing defect, Olympic Kilns will repair, replace, or refund as appropriate within thirty (30) days.

Repaired or replacement parts will be shipped back to the customer at Olympic Kilns’ cost using the customer’s package. The customer is responsible for reinstalling the parts.

Non-Warranty Repairs

If the parts sent to Olympic Kilns require repair or replacement for a reason not covered by the warranty, no work will be performed until the customer authorizes the work and makes payment arrangements.

Limits of Warranty Coverage

Olympic Kilns shall not be liable for injuries to persons or property, or for incidental, contingent, special, or consequential damages arising from the use of its products.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to every customer. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

Manufacturer Information

Olympic Kilns is manufactured by Haugen Manufacturing, Inc.

P.O. Box 1347
4225 Thurmon Tanner Parkway
Flowery Branch, GA 30542

Need Help?

If you have questions about your Olympic Kilns warranty, need help identifying your warranty coverage, or believe your kiln may need warranty service, please contact Peach State Pottery.

Email: sales@peachstatepottery.com
Phone: 470-264-3563